🐝🐝🐝🐝🐝⚡️⚡️⚡️⚡️⚡️Probably the most annoying sounding and boring watching video in your feed today. Mission accomplished!
Here’s a quick 21” nonstop pass on one these @rkautowerks B58 air to water intake manifolds. Enjoy 😉 🤣🐝🐝🐝🐝🐝🐝
#gtaw
#tigwelding
#tig
#wadefab
#racecar
Had the pleasure of seeing this TT F150 back in my shop owned by long time local buddy, @keatonspence
He asked I finish out a full stainless 3” exhaust from the existing open downpipe configuration with electronic cutouts and terminate it right before the rear axle.
You ask and you shall receive!
We checked all the boxes with this project.
Vband assemblies through out for easy install/removal.
@stainless_bros electronic 3” cutouts with 2 key-fobs.
3” X-Pipe with added flex sections to absorb engine & exhaust movement.
Full straight through dual 3” inlet and 3” outlet @vibrant_performance muffler & canister resonators in line with dual slash cut tips to finish off the muffler.
Thanks again for the support Keaton and Chris!
_Wade
If anyone seeing this is interested in an exhaust like this or to having something else fabricated for your ride, please don’t hesitate to reach out!
#wadefab
#f150
#twinturbo
#ttcoyote
#mexicangtr
Quick little video I wanted to make to address a topic that’s been eating at me a little bit regarding “discounts”.
You’re likely coming to me for my services because you want premium work… so expect that and not a cheap end price as the return.
Maybe pick a cheaper hobby or go seek out a lesser quality fabricator/shop.
Big thanks to @arcenemyfab for this care package! I love some organization as well as tubes NOT grabbing and spinning in my bandsaw! Thanks so much man. Knocked it out of the park!!!
#3dprinting
#wadefab
#peoplehelpingpeople
When the data says it needs it, we listen. NISMO project is getting the full @wadefab treatment — all entirely new piping, with 4” fender exits. Built to perform, not just look good 🏁
🔧World Class technicians
⚡️ Custom Wiring Harnesses
🧠 MoTeC (as on this car), Syvecs, and aftermarket ECU integrations
📊 Data-driven dyno tuning and rental
🏁 Full Builds
#horsepowerlounge #gtr #nismo #nismogtr #r35
Just finished up this beauty belonging to @2016nismo_ ! All new intercooler piping, intakes, and exhaust with lots of other little upgrades littered throughout! Can’t wait to see how this car continues to evolve! Dyno tuning coming up shortly by Wayne himself and the guys at @horsepowerlounge ! Stay tuned for updates!
#tx2k
#wadefab
#horsepowerlounge
#precisionturbo
#nismo
The gang at @horsepowerlounge was like, yo dawg, we got some big turbos and this car needs to go fast!!!
Say less, gang!
Here ya have it!
Features two big ol @hptturbochargers units with 4.5” stainless independent (un-merged) exhaust!
Also, features both an intercooled and non-intercooled interchangeable setup. (For future testing).
Can’t wait to see this thing soon rip down the runway to chase after some big MPH’s!!!
Can’t wait to see what the gang at HPL and Wayne on the keyboard can do with this!
These builds have been fun!
Let’s go racing! 🏎️
#hptturbo
#horsepowerlounge
#wadefab
#racecar
Looking for a welding positioner…. This seems overall the best bang for the buck. I don’t feel like messing around with the Vevor brand and having to swap out the electric motor for a slower rotating one.
The one seen here is $1295
What do YOU all have to say?
_Wade
Hey y’all! Putting my enclosed trailer up for sale! It’s been great to me for a long time now. Just time to refresh and upgrade some.
I’m the second owner.
Title in hand.
Tires have maybe 500 miles. Great condition.
It’s a 2015.
24’ box with a 2’ V-nose, so 26’ in total.
Has brakes on both axles.
2 5/16” ball.
Has a nice custom built by myself front interior work bench and shelving.
Has built in recessed E-track throughout the entire floor and some on the sides.
Over the years I’ve had to reseal the roof from the factory sealant breaking down causing water leaks.
The paneling, mainly on driver side, is beginning to get old and brittle causing the screws/paneling to want to separate so I’ve simply bought good quality black gaffers tape to keep the panels bonded together with no further issues.
Any other or further questions please don’t hesitate to ask!
Trailer pulls great and straight as a string!
**Upon sale all interior loose items seen in photos will be removed.** (All straps and accessories belong and will remain mine).
Asking $6999 obo
#fs #forsale
@eric_cothrum dropped his twin turbo F150 for some upgrades on a very tight time frame in order to make a qualifying date for Cleetus AWD shootout. No problem. With some stainless parts overnighted from @stainless_bros and @aceraceparts the project was a success.
Removed the 3.5” stainless downpipes I previously made for some new sanitary grade 4” symmetrical uppipes with turbine containment rods added in for safety and track rule compliance.
Also we changed up the dumptubes and ran them upwards out the hood and finished everything off with some carbon fiber trim rings and block offs from previous hood cutting activites.
Best of luck Eric and thanks for your continued support!
Wrapped up this R35 build last week for @matt_hansen_crushing_for_life that I previously posted about.
Was asked to handle the charge piping, modify the air to water intercooler inlet/outlet tubing appropriately as seen, turbo inlet intakes, 4” side exit exhaust, dry sump tank mods & install, and a slew of other little things.
Now she’s back where she will be fully wired and assembled @chicoll01 shop then back here for final tuning by Wayne Potts.
This will undoubtedly be a top 68mm class contender! 💪
I can’t get enough of this platform. Such a properly designed car for fun fab work!
#wadefab
#r35
#gtr
#racecar
#nissan
Welp, looks like the cats out of the bag!
WadeFab has now moved into its own proper home! Outgrew the home shop situation pretty quickly 😮💨
I wanted to hold off making this post until the shop was 95-100% done, but that’s still weeks out and I wanted to go ahead and publish this to make it known that if anyone needs a shop for some last minute welding/fabrication or if shit hits the fan at the TX2K and you’re looking for a shop for some repairs/welding/fabrication give me a holler!
I am ~62 miles from Texas Motorplex. (Located in southern Rockwall/Terrell off 205s)
I am now in the same complex as @horsepowerlounge and @murcarauto which I have teamed up with to help, provide, and assist my welding and fabrication services to as well as countless others.
With that being said, by partnering with @horsepowerlounge & @wayneosan with his tuning services @isctuning and them being right next to me, technician/mechanical/wiring/diag/Mainline dyno tuning can now be offered!!! This is now a one-stop-shop destination for everything!
Lots to come still! I’m very excited to say the least. My long time dream finally coming true!!!
I still have to finish up some shop wiring for the lighting, pallet racks, and a few more things like a lathe & knee-mill but it’ll all get done in due time!
I’m still just a one-man shop to bear with me!!! I’m almost back to running fully with this move.
I owe thanks to many of you out there and I know I’ll forget a few but I extend all my gratitude and appreciation to everyone who has helped thus far and continually!
This shop move and setup has been fun. I want to provide a professional looking facility that emphasizes in the utmost level of service of my welding and fabrication business as well as offering a meticulously clean and organized environment and workspace with a touch of coziness and comfort. I’m aimed at creating this from the visions I’ve had for over a decade of dreaming of having my own shop. If you know me, then you know how much of a freak I am for cleanliness & organization.
Anywho enough of the ramble and cheers to continued success and support from all of my family, friends, and customers! Thank you so much!
#WadeFab
