This P22 Durability Kit features the @gemstatemachine P22 Connector Stub and the @fireniceperformance P22 Ultimate Clutch Bolt.
Key Benefits: Connector Stub:
-Mechanically ties sheaves together
-Improves clutch performance
-Reduces stress on the primary clutch bolt
Made from high-strength 17-4 stainless steel
-Simple installation
-Fits all P-22 clutch revisions
-Features a shim washer for a strong bolted joint
Key Benefits: Ultimate Bolt:
-Unmatched Strength: 46% stronger than stock
- Enhanced Durability
-Stress-Relieved Design
-Safety: This is not just a performance part. Losing a clutch bolt in the backcountry can leave you stranded. Having a bulletproof design allows you to make it home after every ride.
-Increased Clamp Load: Holds clutch components together in a solid, unmovable joint allowing for improved clutch performance.
-Fits all P-22 clutch revisions
@redhousecreativeco with the Video!
#PolarisMatryx
#polarisboost
#polarissnow
#9r
#snowmobile
#snowmobiling
Easily adjust Belt to Sheave Clearance on the Polaris P-22 clutch without special tools or expensive machining.
Don't delete the roller bearing and waste $300+ on other adjustment kits.
Most Boost and 9R clutches Belt to Sheave clearance are at the upper end of the Polaris spec: 0.040-0.060″.
This is too large for optimum performance in the mountains. This leads to decreased performance, inconsistent clutch shift, poor bottom end, and grooving of the drive clutch sheaves.
FNI recommends 0.020-0.030″
FNI Pilot Spacer Benefits:
Allows Belt to Sheave Clearance to be reduced/adjusted by up to 0.020″.
Includes a 0.010″ and a 0.005″ shim to fine adjust.
Machined from 17-4 stainless steel. Held to tight tolerances.
Easy install.
Affordable vs machining stock components.
*Recommended to use P-22 Ultimate Clutch Bolt and/or P-22 Clutch Stub in conjunction with this product.
This P22 Durability Kit features the @gemstatemachine P22 Connector Stub and the @fireniceperformance P22 Ultimate Clutch Bolt.
Key Benefits: Connector Stub:
-Mechanically ties sheaves together
-Improves clutch performance
-Reduces stress on the primary clutch bolt
Made from high-strength 17-4 stainless steel
-Simple installation
-Fits all P-22 clutch revisions
-Features a shim washer for a strong bolted joint
Key Benefits: Ultimate Bolt:
-Unmatched Strength: 46% stronger than stock
- Enhanced Durability
-Stress-Relieved Design
-Safety: This is not just a performance part. Losing a clutch bolt in the backcountry can leave you stranded. Having a bulletproof design allows you to make it home after every ride.
-Increased Clamp Load: Holds clutch components together in a solid, unmovable joint allowing for improved clutch performance.
-Fits all P-22 clutch revisions
@redhousecreativeco with the Video!
#PolarisMatryx
#polarisboost
#polarissnow
#9r
#snowmobile
#snowmobiling
Easily adjust Belt to Sheave Clearance on the Polaris P-22 clutch without special tools or expensive machining.
Don't delete the roller bearing and waste $300+ on other adjustment kits.
Most Boost and 9R clutches Belt to Sheave clearance are at the upper end of the Polaris spec: 0.040-0.060″.
This is too large for optimum performance in the mountains. This leads to decreased performance, inconsistent clutch shift, poor bottom end, and grooving of the drive clutch sheaves.
FNI recommends 0.020-0.030″
FNI Pilot Spacer Benefits:
Allows Belt to Sheave Clearance to be reduced/adjusted by up to 0.020″.
Includes a 0.010″ and a 0.005″ shim to fine adjust.
Machined from 17-4 stainless steel. Held to tight tolerances.
Easy install.
Affordable vs machining stock components.
*Recommended to use P-22 Ultimate Clutch Bolt and/or P-22 Clutch Stub in conjunction with this product.
Now available for Pre-Order from Fire N Ice!
CaribouX G5 MOD Hoods
Lightweight. Durable. Purpose-built for the mountain.
Engineered for riders who demand performance without compromise, the CaribouX MOD Hood for Ski-Doo and Lynx, Gen 5, delivers strength and simplicity in one clean package. Built from reinforced TPE — a material chosen for its exceptional toughness and impact resistance — this hood won’t crack under pressure, even in the harshest mountain conditions.
Despite its rugged construction, it weighs just 7 pounds, giving you a significant weight reduction compared to stock while maintaining a great fit. Installation is seamless: transfer your stock mesh filter, bolt it on, and ride.
A custom airbox box is integrated into the design, compatible with both Turbo and Naturally Aspirated (NA) models, and works with your stock intake covers and optional flapper valve*. *The flapper valve can be installed but requires cutting into the intake.
The built-in integrated bag adds convenience directly integrated into the hood — offering ~5 liters of heated, waterproof storage inside a mesh pocket that passively warms your gloves or goggles as you ride.
Whether you’re carving deep lines in the backcountry or pushing for the podium at Jackson, the CaribouX MOD Hood delivers the perfect blend of weight savings, durability, and function.
Key Features
•Direct-fit replacement — installs using stock mounting points and components
•G5 Mountain sleds – made to fit directly with G5 mountain sleds from Ski-doo
•Custom airbox box included — fits both Turbo and NA Ski-Doo Gen5 models
•Reinforced TPE construction — tough, flexible, and impact-resistant
•Lightweight design — approximately 7 lbs total
•Integrated heated bag — waterproof 5L compartment warms gear while you ride
•Retains OEM intake covers and optional flapper valve compatibility
•Sleek black finish for a clean, factory-inspired look that works with all colors
#skidoo #lynx #snowmobile #snowmobiling #sweden
Get ready to boost performance on your Polaris Matryx! 💨
Benefits: * More Air = More Power: Increase your engine's airflow for a significant power boost. * Easy Install: Direct replacement for stock vents, making installation a breeze. * Reduce Bogging: Improve throttle response and eliminate bogging issues. * More Than 2x Intake Surface Area: Maximize airflow for optimal performance.
Head over to our website or your local dealer to grab yours today. ❄️🔥
#polarismatrix #bigairintake #polaris #snowmobiling #snowmobile #performanceupgrade #firenice #pricedrop #deals #winterfun
Hay Days Sale is live! ❄️
Head over to firenice.us to save on a huge selection of products, including:
* Catalyst Intake Kits - 30% off
* Closeout/Discount Products - Up to 75% off
* Intake Boost Vents - 30% off
* Gen 5 Ski-Doo & Lynx Knee Vents - 30% off
Plus, save 20% on all non-sale items with code: haydays25
This is your chance to save big on in-stock and pre-order Ohlins Shocks and Caribou X lightweight hoods.
Don't miss out on these incredible deals. Shop now before they're gone!
The sale ends Monday, September 8th.
Ride safely,
The Fire N Ice team
Unboxing the new P22 Connector Stub from @gemstatemachine
Made from super strong 17-4 Stainless this product address a very poor failure mode on the Polaris Boost and 9R
Drop any questions below 👇🏽
#PolarisMatryx #Polaris #polarisboost #9R #polarissnow
New product announcement ☃️
This P22 Durability Kit features the @gemstatemachine P22 Connector Stub and the @fireniceperformance P22 Ultimate Clutch Bolt.
Key Benefits: Connector Stub:
-Mechanically ties sheaves together
-Improves clutch performance
-Reduces stress on the primary clutch bolt
Made from high-strength 17-4 stainless steel
-Simple installation
-Fits all P-22 clutch revisions
-Features a shim washer for a strong bolted joint
Key Benefits: Ultimate Bolt:
-Unmatched Strength: 46% stronger than stock
- Enhanced Durability
-Stress-Relieved Design
-Safety: This is not just a performance part. Losing a clutch bolt in the backcountry can leave you stranded. Having a bulletproof design allows you to make it home after every ride.
-Increased Clamp Load: Holds clutch components together in a solid, unmovable joint allowing for improved clutch performance.
-Fits all P-22 clutch revisions
#PolarisMatryx
#polarisboost
#polarissnow
#9R
