Zero Gravity

Smooth line work is about more than looks. We set out to design a scope mount that fit the scope tube as well as possible, given the assembly limitations. The “tried and true” two-piece system has worked for decades, so why question it? If you do some searching around and talk to some people that spend a lot of time setting up and using optics, you will find that the two-piece clamp has some well known drawbacks. Mainly, getting the reticle to stay level while torquing the fasteners. And once in a while, an inability for the elevation and or windage turret to be adjusted once the clamp is torqued to spec. But why? The short answer for the sake of this long winded post, is that the distortion of the tube caused by the rings, translates to distortion in the scope components, geometry, and tolerances. All of which are critical for performance, accuracy, and repeatability.

Leveled, torqued and zero’d Will be checking out the new @colt.optics 1-8 over the next few weeks I’ll be dedicating some time out to ~500 yards as well as running it on the 1x for CQB shooting. If you’ve got any questions drop them below. @zero_gravityllc summit mount 34mm 1.54 height @fixitsticks_official @magpod @lmtdefense @exigentdefense fireteam556 @b5systems sopmod @subrevtech bag rider

ChatGPT can’t beat this AI

Go far 🚀

@zero_gravityllc Scopes are an expensive investment, as they should be. Without clear vision you can only get so far and you want to protect your investment. This is where Zero Gravity comes into play. Zero Gravity created a clamping solution that not only mounts your scope securely, but prevents damage to the scope tube. Using a three-piece design, they overlap each piece into the next creating a seamless contact area that maintains the scope tubes original shape. Having the rings come together at a single central point allows them to swing together evenly as they are torqued, eliminating the “roll” that makes setting up a scope in other mounts so tedious and time consuming. Scope mounts and optional mounts for your red dot are available. Designed and manufactured here in the USA 🇺🇸 Through @timber_ridge_collective Zero Gravity is supporting @briansworld934 as he privateers this summer in @promotocross Welcome Zero Gravity to the Moto-Sphere 🌎 MX Tech & Talk 🌶️DISCOUNT CODES🌶️ 10% off Luxon MX code (pinned IG&FB) 15% off RaceTech Titanium “mxtechtalk” 10% off Stuck NutZ “MXTT10” 10% off Shield Arms “MXTT” ——————————————————— #mxtt #supercross #sx #smx #motocross

INCREASE STABILITY With the STREAMLINE BARRICADE BAG Summer is here so that means Ranger Green is in season. 👊🤙

Tools of the craft..

The cycle.. Train, build some skill Compete, go test your skill against other shooters. Learn, what worked, what didn’t work, identify gaps Go back to training, repeat the process Not pictured infinite rabbit holes you will potentially go down. 📸 - @gasgnnr @sunandshadow_llc @precisiongasgun

Loadout for a coffee run in hostile territory. Who's on Overwatch?

Video coming later today about the 12.5 setup and the @precisiongasgun Razorback Rumble match at @twistedbarrel_precision Bunch of good questions from the story post but if you have any other questions drop them below and I’ll add them to the list for the video 👊🏻 📸 - @gasgnnr @sunandshadow_llc @precisiongasgun

QUALITY SETUP & QUALITY AMMO @noveske_llc 16” RECON 556 @bonefrogammunition @leupoldoptics 3.6-18 @zero_gravityllc Mount @onehundredconcepts Hex Cap

34mm Low Height Sherpa’s for RMR and DPP are here. Adding only about half an ounce to an existing Summit Mount, these 12 O’Clock red dot mounts keep weight low and performance high.