Torque Solution

🚨 New Product Alert 🚨 Torque Solution V2 HD Oil Pan w/ Street Baffle Applications: Subaru EJ Engines Coming Soon!!! ETA 12/18/25 Product Code: TS-SU-599V2-S /product-p/ts-su-599v2-s.htm Torque Solution V2 HD Oil Pan is the perfect solution to keep your EJ engine happy and lubricated. Our pan is molded from cast aluminum and then CNC'd to perfection providing approximately 6 quarts of oil capacity. It also features a CNC oil pan groove with a FKM rubber o-ring gasket for a leak proof seal that offers ease of installation and future removal. No more scraping off gasket material!! We also incorporated cooling fins to the bottom of the pan, which are positioned to have air flow pass through them to aid in keeping oil temps down. The new and improved oil pan now features a bolt-in baffle. The baffle is an integral part of the oil pan to prevent slosh and help keep the oil at the pickup where it is needed. All necessary install hardware is included. No need to buy any extra parts to install!! - CNC Cast Aluminum - 6 Quart Oil Capacity (Over 30% Increase In Oil Capacity) - Stainless Steel / Tig Welded Bolt-In Internal Street Baffle - Seamless FKM Rubber O-Ring Gasket - CNC Cooling Fins - M20 (OEM) and 1/2" NPT Ports - Stainless Steel Install Hardware - No Additional Install Hardware Needed!! - Limited Lifetime Warranty Fits: - All EJ20/25 Engines Includes: - Cast Aluminum Oil Pan (1) - Bolt-In Stainless Steel Street Baffle (pre-installed) (1) - M6 x 15 Stainless Button Head Bolt (pre-installed w/ baffle) (4) - Seamless FKM Rubber Oil Pan O-Ring Gasket (1) - FKM Rubber Dipstick Tube 2x10mm O-Ring Gasket (2) - M20 OEM Subaru Drain Plug P/N: 807020010 (1) - M20 Copper Drain Plug Gaskets (5) - 1/2" NPT Brass Plug w/ Teflon Tape (used if not using a temp sensor) - 1/2" NPT to 1/8" NPT Brass Plug w/ Teflon Tape (optional for oil temp sensor) - Billet Aluminum Oil Pick Up Suction Tube Spacer w/ x2 -117 FKM O-Ring Gasket (1) - Billet Aluminum Oil Pick Up Pedestal Spacers (2) - FKM Rubber Spacer Bolt Retainer -008 O-Ring Gaskets (4) (used to pre-install the spacers onto the oil pick-up) - M6 Stainless Steel Flat Washer (4) (for oil pick

🚨 New Product Alert 🚨 Torque Solution V2 HD Oil Pan w/ Race Baffle Applications: Subaru EJ Engines Product Code: TS-SU-599V2-R /product-p/ts-su-599v2-r.htm Torque Solution V2 HD Oil Pan is the perfect solution to keep your EJ engine happy and lubricated. Our pan is molded from cast aluminum and then CNC'd to perfection providing approximately 6 quarts of oil capacity. It also features a CNC oil pan groove with a FKM rubber o-ring gasket for a leak proof seal that offers ease of installation and future removal. No more scraping off gasket material!! We also incorporated cooling fins to the bottom of the pan, which are positioned to have air flow pass through them to aid in keeping oil temps down. The new and improved oil pan now features a bolt-in baffle. The baffle is an integral part of the oil pan to prevent slosh and help keep the oil at the pickup where it is needed. All necessary install hardware is included. No need to buy any extra parts to install!! - CNC Cast Aluminum - 6 Quart Oil Capacity (Over 30% Increase In Oil Capacity) - Stainless Steel / Tig Welded Bolt-In Internal Race Baffle - FKM Rubber Oil Control Flaps - Seamless FKM Rubber O-Ring Gasket - CNC Cooling Fins - M20 (OEM) and 1/2" NPT Ports - Stainless Steel Install Hardware - No Additional Install Hardware Needed!! - Limited Lifetime Warranty Fits: - All EJ20/25 Engines Includes: - Cast Aluminum Oil Pan (1) - Bolt-In Stainless Steel Race Baffle w/ FKM Rubber Oil Control Flaps (pre-installed) (1) - M6 x 15 Stainless Button Head Bolt (pre-installed w/ baffle) (4) - Seamless FKM Rubber Oil Pan O-Ring Gasket (1) - FKM Rubber Dipstick Tube 2x10mm O-Ring Gaskets (2) - M20 OEM Subaru Drain Plug P/N: 807020010 (1) - M20 Copper Drain Plug Gaskets (5) - 1/2" NPT Brass Plug w/ Teflon Tape (used if not using a temp sensor) - 1/2" NPT to 1/8" NPT Brass Plug w/ Teflon Tape (optional for oil temp sensor) - Billet Aluminum Oil Pick Up Suction Tube Spacer w/ x2 -117 FKM O-Ring Gasket (1) - Billet Aluminum Oil Pick Up Pedestal Spacers (2) - FKM Rubber Spacer Bolt Retainer -008 O-Ring Gaskets (4) (used to pre-install the spacers onto the oil pick-up) - M6 Stainless Steel Fla

New Product 🚨🚨 Torque Solution High Volume Intake Manifold Applications: Subaru WRX 2006-2014, STI 2004-2021 (for DBW Throttle Bodies Only) Product Code: TS-SU-675 Torque Solution High Volume Intake Manifold for Subaru WRX 06-14, STI 04-21 EJ20 / EJ25 DBW engines is the perfect addition to your WRX / STI. Made from cast aluminum using a metal casting process and then finished off by CNC’ing the flanges for a perfect fit. Our intake manifold design allows you to increase the flow and air volume to your engine making it ideal for high HP applications or if you just want to stand out from the crowd with it’s sleek clean design. Our IM retains the stock TB position which results in a much easier install over other IM’s on the market. No need to modify or make custom FMIC piping to complete the install!! Also, works with all OEM / aftermarket TGV’s!! The TS IM is also easily reversible to a forward-facing configuration by simply flipping the vacuum block (customization will be required for forward facing)!! We feel these features make our IM the most versatile available on the market!!! The intake manifold comes as a natural raw aluminum finish. Ready for you to bolt on and use or get powder coated to your liking. - CNC’d Cast Aluminum - Increased Volume Over OEM IM - Large Tapered / Radiused Runners - Retains Stock Throttle Body Position - Works w/ OEM and NON-OEM TGV Housings - Standard or Reverse Rotation Capable - Reversible Billet Aluminum Vacuum Block - Limited Lifetime Warranty Works with FMIC piping kits that fit the OEM IM in standard rotation. *Important Install Notes: - Stock location turbo configurations will need to run a minimum 19mm IM/TGV spacer, such as PN: TS-SU-478-TGV (lower) or TS-SU-811 (upper) for added inlet clearance (confirmed to fit with ALL known inlets while using the spacers). - Boomba DBW throttle body is direct bolt on without any added adapters. - TMIC install may be possible with some smaller TMIC’s and custom brackets. We cannot confirm this, as we will not be testing these configurations.

🚨 New Product Alert 🚨 Torque Solution V2 Billet Rear Subframe Bushing Kit Applications: Toyota GR Supra MKV A90 A91 Product Code: TS-GR-698V2 /product-p/ts-gr-698v2.htm All Torque Solution billet rear subframe bushings are made from high grade billet 6061-T6 aluminum material. This is a direct replacement of the OEM subframe bushings. You can rest assured that with our superior material and design you will get optimal performance for years and decades to come. - Helps Eliminate Wheel Hop / Traction Loss - Improved 60' / ET's - CNC 6061-T6 Billet Aluminum - Black anodized - Provisions In Billet to Install Without Any Modification - Lighter Weight than V1 - Limited Lifetime Warranty Includes: - Front 689v2-1 Billet Insert (2) - Rear 689v2-2 Billet Insert (2) **This mount is intended to increase the performance of your vehicle. Due to the design utilizing solid billet aluminum there will be increased noise, vibration, and harshness (NVH) as a result. We don't recommend them for street applications. **Professional installation recommended, as well as a wheel alignment after installation.

🚨 New Product Alert 🚨 Torque Solution 19mm Billet Intake Manifold Spacer Applications: 19mm for Subaru EJ Engine w/ NA or JDM Long Runner Intake Manifold Available in Clear (Silver) or Black Anodized! Silver /product-p/ts-su-478b-s.htm Black /product-p/ts-su-478b-bk.htm Torque Solution 19mm Billet Intake Manifold Spacer for Subaru EJ Engines w/ NA/JDM Intake Manifold is the perfect solution when doing a long runner IM swap and you need clearance for the AVCS solenoids or for custom reversed IM setups. Our spacers are made from CNC'd 6061 billet aluminum and supplied with o-ring gaskets on the top and bottom for a boost leak free seal. No OEM gaskets needed!! - CNC'd 6061 Billet Aluminum - Black Anodized - O-ring gaskets on top and bottom - 19mm Thick - Zinc Install Hardware Included - Limited Lifetime Warranty Includes: - 19mm Billet IM Spacer (2) - O-ring Gasket (8) - M8-1.25 x 45 Zinc Socket Cap Bolt (8) - M8 Zinc Flat Washer (8) Fits: - Subaru WRX 2002-2014 - Subaru WRX STI 2004-2021 - Subaru Legacy GT 2005-2012 - Subaru Forester XT 2004-2013 **If running any other than a NA or JDM Long Runner IM you will or may need to source longer hardware for the center bolts.

🚨 New Product Alert 🚨 Torque Solution BOV Plate Applications: Ford Focus RS 2016-2018 Product Code: TS-RS-579 /product-p/ts-rs-579.htm Torque Solution Billet BOV Plate allows you to run an external blow off valve in another location on your piping etc. - 6061 Billet Aluminum w/ O-Rings - Black anodized - Direct Fitment - M6x12 Stainless Steel Socket Cap (3) - Limited Lifetime Warranty

🚨 New Product Alert 🚨 Torque Solution Rear Adjustable End Links Applications: Nissan GTR R35 2009+ Product Code: TS-GTR-922 /product-p/ts-gtr-922.htm Torque Solution Adjustable Front Sway Bar End Links offer increased load capacity and are able to be used with stock or aftermarket sway bars. Also, due to the end links being adjustable you are able to eliminate preload on the sway bar, which can be caused by uneven suspension heights or settling. This is especially common with aftermarket suspension. - CNC 7075 Billet Aluminum - Black Anodized w/ Torque Solution Logo - Adjustable - PTFE Lined Rod End w/ Chromoly Studs - Limited Lifetime Warranty Includes: - Billet Aluminum Link (2) - PTFE Lined Zinc Rod End w/ M10-1.5 Stud (4) - M10-1.5 Zinc Nyloc Flange Nut (4) Fits: - Nissan GTR R35 2009+

Well helloo #subaru #bigturbo #cars #jdm #carros

🚨 New Product Alert 🚨 Torque Solution Fuel Pressure Regulator (FPR) Adapter Applications: Subaru WRX 08-14, LGT 10-12 Product Code: TS-SU-905 /product-p/ts-su-905.htm Torque Solution Fuel Pressure Regulator (FPR) Adapter for Subaru WRX 08-14, LGT 10-12 allows you to remotely mount the OEM fuel pressure regulator to complete the install of aftermarket fuel lines and rails while retaining the OEM FPR. Converts the OEM FPR to a 3/4" hose barb fitting. Universal single M6 bolt mounting point to allow you to bolt to your IM or location of your choosing. - CNC'd 6061 Billet Aluminum - Black Anodized - Compatible with all fuel types - Stainless Install Hardware Included - Limited Lifetime Warranty Includes: - Billet 905 Fuel Pressure Regulator Adapter (1) - M6-1.00 x 12 Stainless Socket Head Bolt (2) - M6 Stainless Flat Washer (2) Install Note: This is intended for a DIY fuel line hose installation allowing you to easily reuse and relocate the OEM fuel pressure regulator..

🚨 New Product Alert 🚨 Torque Solution Fuel Pressure Regulator (FPR) Adapter Applications: Subaru WRX 02-07, STI 07 Product Code: TS-SU-904 /product-p/ts-su-904.htm Torque Solution Fuel Pressure Regulator (FPR) Adapter for Subaru WRX 02-07, STI 07 allows you to remotely mount the OEM fuel pressure regulator to complete the install of aftermarket fuel lines and rails while retaining the OEM FPR. Converts the OEM FPR to a 3/4" hose barb fitting. Universal single M6 bolt mounting point to allow you to bolt to your IM or location of your choosing. - CNC'd 6061 Billet Aluminum - Black Anodized - Compatible with all fuel types - Stainless Install Hardware Included - Limited Lifetime Warranty Includes: - Billet 904 Fuel Pressure Regulator Adapter (1) - M6-1.00 x 12 Stainless Socket Head Bolt (2) - M6 Stainless Flat Washer (2) Install Note: This is intended for a DIY fuel line hose installation allowing you to easily reuse and relocate the OEM fuel pressure regulator.

It's getting there. @nextmod #mkvsupra #supramk5 #grsupra #carsofinstagram #racecarshit @arpbolts @torquesolution

🚨TORQUE SOLUTION AVAILABLE TO ORDER❗️🔥 ORDER YOUR TORQUE SOLUTION NEEDS WITH US TODAY❗️ - ENGINE MOUNTS - SHORT SHIFTERS - SHIFTER BUSHINGS - EXHAUST MOUNTS - PULLEYS - TOOLS & MANY MORE BEST PRICES 💰 GUARANTEED❗️ LET US KNOW WHAT YOU NEED❓ IN HOUSE PERFORMANCE PARTS, FABRICATION, INSTALLATION, DYNO TUNING, ENGINE BUILDS & TRANNY BUILDS AVAILABLE❗️🔥 FOR PRICING GIVE US A CALL ☎️ AT 215-227-6000 OR 📲 DM US ON INSTAGRAM WE GOT YOU COVERED❗️ ORDER ONLINE 💻 WE NOW OFFER AFFIRM, KOALAFI & PAYPAL CREDIT FINANCING OPTIONS❗️ 🏢IMPORT DPS 📍2951 N MARSHALL ST PHILADELPHIA PA 19133 ☎️ 215-227-6000 📧 [email protected] 📲 INSTAGRAM DM @importdps 💻 #ImportDPS #ImportDPSonline #TorqueSolution #BilletMounts #EngineMounts