Check out this awesome video from BOOSTLINE PERFORMANCE, showcasing the results of removing an A2A intercooler with one of our METHANOL INJECTION SYSTEMS!
Give your Evo X water-methanol setup a cleaner nozzle location.
Our Snow Performance Evo X Water Methanol Plate installs between the throttle body and intake manifold, providing a clean mounting point for up to 2 Snow Performance Hyper-Sonic nozzles right where you need them.
Designed for the 2.0L Mitsubishi Evo X, this plate helps avoid drilling into the intake tube while keeping the install clean, simple, and effective.
Includes the throttle body spacer injection plate, high-temperature gasket, required hardware, and fitment instructions.
When Power Matters, Trust Snow Performance. #evox #watermethanol #snowperformance
Built for high-compression, carbureted V8 muscle.
The Snow Performance 4500 Flange Water-Methanol System is designed to help naturally aspirated engines run cooler, make more power, and take advantage of increased effective octane on pump gas.
Using a 4500-style carb spacer plate, 300 PSI UHO pump, dual nozzles, WOT switch, and an included solenoid to help prevent vacuum siphoning, this Stage 1 system delivers water-methanol under full throttle when your engine needs it most.
A clean, effective upgrade for serious carbureted builds running 11:1 to 13:1 compression and beyond.
When Power Matters, Trust Snow Performance. #snowperformance #WaterMethanol #carbureted
For the 2.0/2.3L Ford EcoBoost guys who want cooler charge temps, better pump gas performance, and a cleaner way to add water-methanol.
The Snow Performance Stage 2.5 Boost Cooler System is built specifically for these EcoBoost platforms, featuring a direct-port injection plate, four Hyper-Sonic nozzles, a high-flow solenoid, braided stainless line, 4AN fittings, and the VC-50 progressive controller. Instead of just spraying at a fixed rate, the VC-50 brings the system in with boost so delivery ramps in as the engine actually needs it.
Lower IATs, added octane support, help with carbon buildup, and a much cleaner install than trying to piece together a universal setup.
Made in the USA and built for boosted Fords that get driven hard.
When power matters, trust Snow Performance. #mustang #Ecoboost #snowperformance
Clean up your 102mm LS water methanol install with the Snow Performance Throttle Body Injection Plate.
Designed for aftermarket 102mm LS throttle bodies, this plate features 2 built-in water-methanol nozzle ports, allowing you to run a single or dual-nozzle setup without drilling into your intake tube. Bolt it on, seal it up, and get a cleaner, more professional install with the nozzle placement right where it needs to be.
Made in the USA and built for serious boosted LS setups.
When Power Matters, Trust Snow Performance. #snowperformance #WaterMethanol #ls
The Snow Performance BMW Water-Methanol Plate mounts at the throttle body, giving you a simple, clean way to add water-methanol injection without drilling or welding into your intake setup. When paired with the proper Snow Performance water-methanol system, this plate helps reduce IATs, create a cooler, denser air charge, and increase octane potential for better performance under boost.
This is the plate-only option and includes the adapter plate, O-rings, required hardware, and fitment instructions. Nozzles, lines, and distribution components are sold separately.
When Power Matters, Trust Snow Performance.
#SnowPerformance #WaterMethanol #BMW
Built for boosted Genesis 2.0T owners ready for cooler, harder-hitting power.
The Snow Performance Stage 2 Water Methanol System for the 2010-2014 Hyundai Genesis Coupe 2.0T helps cool intake temps, increase octane quality, and support more boost and timing on pump gas.
Featuring a custom throttle body spacer plate, braided stainless line, methanol-safe fittings, a 2.5-gallon trunk mount tank, dual Hypersonic nozzles, and Snow’s 300 PSI UHO pump, this system is built for clean installation and reliable delivery.
The VC-50 progressive controller scales injection with boost and combines a 52mm boost gauge and water-methanol controller in one clean display.
When Power Matters, Trust Snow Performance. #Genesis #snowperformance #WaterMethanol
The Snow Performance 0-500 PSI Pressure Gauge gives you a clear, easy-to-read pressure reference when setting up CO2 pressure control systems or low-pressure safety switch setups on water-methanol systems. Instead of wondering where pressure is at, you can see it, verify it, and make adjustments with confidence.
Whether you’re dialing in pressure control or just making sure the system is doing what it should, this gauge is a simple piece that adds a lot of value during setup and tuning.
Coming standard with an 1/8 NPT male connection and a clean, readable face, it’s a solid addition for anyone who wants their system set up right.
When Power Matters, Trust Snow Performance. #WaterMethanol #boost #pressuregauge
Give your water-methanol system the control it needs as boost comes in.
The Snow Performance VC-30 Progressive Controller uses the included MAP sensor to ramp injection based on boost pressure, helping deliver cooling when your engine needs it most. Adjustable start and full points let you fine-tune the delivery curve for your setup, while the digital display and included wiring make installation and tuning straightforward.
A solid upgrade for turbo and centrifugal supercharged street/strip builds, especially direct-injected engines that can benefit from added intake valve cleaning. #WaterMethanol #boost #snowperformance
Boosted 5th Gen Camaro? Give it the cooling and octane support it actually needs.
This Snow Performance Water-Methanol System is built for forced-induction 2010-2015 Camaro SS 6.2L LS3/L99 setups, featuring a custom throttle-body spacer plate, dual Hypersonic nozzles, stainless-braided line, black-anodized fittings, and our 300 PSI UHO pump to deliver serious cooling under boost.
The VC-50 controller brings the system in progressively based on boost pressure, so you're not just spraying mindlessly. It also doubles as a boost gauge, with a 7-color OLED display showing injection percentage, low level, second-stage activation, fault codes, and more.
Cooler air charge, increased effective octane, and more room to run boost and timing safely.
Made in the USA. #snowperformance #camaro #WaterMethanol
Getting a clean boost source on your Hellcat shouldn’t turn into a fabrication project.
This boost tap installs right under the factory MAP sensor on the supercharger lid, giving you an accurate boost reference for a gauge or Snow Performance controller without welding or cutting. Clean install, reliable signal, and an easy upgrade done right. #BoostTap #Hellcat #snowperformance
