Heavy lift FPV mode activated 🚁🎥
Our crew operating the @rr_fpv Alligator X8 with a @freeflysystems Movi Pro and @reddigitalcinema Komodo 6K. Big thanks to @hoodmanusa for the landing pad, @earteccompany for keeping comms clear, @nanukcases for protecting our gear from the elements, and @ignitedigiaustralia for the accessories that keep us moving.
Would you rather pilot or camera operate? 👇
@djiglobal
#HeavyLiftDrone #FPVdrone #DroneCinematography #FilmProduction #trending
ZV-E10 II × Vulture 7inch
Comment if you want to know the setup details.
空飛ぶ一眼！5分飛ぶし、操縦感もめゃちいい！
_________________________
#fpv #fpvdrone #cinematic #cinematography #videography
RR Beluga 30" x8 12s V3 INAV BNF
.
RR Beluga x8 30" 12s Cinelifter is a custom Heavy FPV Cine lifter rig designed for cinematic shots carrying up to 10-15kg+ payload with extended flight times. (Arri Alexa Mini / REDs / Movi / Ronin R2/RS2/RS3 ).
Betaflight or iNav flight software with full GPS features (Pos hold/Alt hold/RTH) + Full Acro available.
180° lens without props on view
Detachable main rail with 6 x adjustable hard points ( 3 on top / 3 on bottom)
up to 15KG payload / 160kmh / 10-15+ min flight time
All accessories from FreeFly Alta X are compatible, like battery tray, landing gear, damper system etc
Payload and batteries can be switched and installed on top or bottom position.
Freefly Movi toad factory ready on top and bottom.
.
For indoor shoots, we now have new equipment that provides safe flights beyond just using a GoPro: the RRFPV Rhino 7” with its protected structure, and we recorded with the RED Komodo 6K and the wide-angle Laowa 9mm T2.9 Lens lens.
Thank you for providing me a discount on this frame and for the collaboration. @rr_fpv@sros25
#rrfpv #rhino #fpv #fpvdrone
RR Rhino 7" x8 v4 BNF
@cloud__surfer__
.
.
RR Rhino 7" x8 BNF is a custom build based on Free Zillion frame, with carbon fiber guards, soft target friendly, very versatile, portable and powerful rig designed for pro cinematic shots carrying up to 3KG+ payload.
Size: 42x40x12 cm
Designed to use with the best alphagel bushers (4 units included) to remove vibrations and jello for a butter smooth footage.
Camera can be switched from -30º to 50º (5º steps) using the included 2 types of carbon fiber side plates.
Designed to fly with 6S power, reaching speeds up to 120km/h with enough power to carry and move smoothly any camera setup up to 3KG+.
Included components:
ESC: 2 x Foxeer Reaper 65a / Hobbywing V2 65a / Voltara 70a
4 x Panasonic Caps Low ESR + Fettec Spike-Absorber
FC: T-MOTOR F7 PRO v2
Motors: BH / XNOVA 2806 1300kv
Props: HQ 7x5x3
HD Video system: DJI O4 PRO with TrueRC Antennas
Receiver: Crossfire Diversity Nano Rx
Gps: Matek M10
XT90 / AS150 Connectors
Vifly Finder 2 - Buzzer
Gryphon - KDE 12v 10a: Onboard dedicated 12v to power any camera.
RR Rhino AlphaGel Universal Camera KIT v5
Recommended Lipo: 6s 4500-5100mah Tattu R-Line 1.0 95c (4000mah min.)
RR Rhino 7" x8 BNF includes a complete drone build, tuned and tested.
RR Vulture BNF
@baha.fpv
.
.
RR Vulture BNF is a custom build based on Vulture from top FPV designer Sam Sanford, very versatile and lightweight, portable and powerful rig designed for pro cinematic shots with payload up to 2KG payload.
Looking for a drone frame that doesn’t back down from the challenge of hauling everything from a GoPro to a RED Komodo? The Vulture Frame Kit is designed to handle the payload versatility that serious filmmakers demand. From agile acrobatic shots with lightweight action cameras to flying cinema rigs for those high-budget productions, this frame does it all. Compatible with cameras like the Sony RX0II, BMPCC4K, and RED Komodo, it’s the Swiss Army knife of cinema FPV frames.
This adaptable beast is equipped with a quick-release camera clip system, making camera swaps fast and tool-free—ideal for shoots where every second counts. The innovative vibration isolation mount uses polypropylene bushings to eliminate jello effects, keeping your footage rock solid without silicone Betagels. Whether you’re chasing race cars or capturing delicate close-ups, the Vulture has you covered. Oh, and did we mention it is configurable to either 6-inch, 7-inch, and 8-inch propellers, so you’re not stuck with just tiny drones for your RX0II? Select the arm size which best suits your flying style and lifting needs.
The Vulture’s payload range is another game-changer: from 120g action cams to 1500g cinema setups, this frame adapts without needing a new PID tune. Fly light, and it’s a stunt-loving speed demon. Load it up, and you’ve got a rock-solid cinewhoop platform with optional prop guards.
Included components:
ESC: TMOTOR F55III / Foxeer Reaper 65a
2 x Panasonic Caps Low ESR + FETtec Spike-Absorber
Dedicated lipo or BEC + Fettec spike absorber.
FC: TMOTOR F7 PRO
Motors: XNOVA 1100kv-1500kv
Props: HQ
HD Video system: DJI O3/O4 + TrueRC Antennas
Receiver: Crossfire Diversity Nano Rx (Vertical extended immortal antennas on both sides)
Gps: Matek M10Q / L4
XT90/AS150 Connectors
Vifly Finder 2 - Buzzer
Gryphon / KDE 12v 10a - Onboard dedicated 12v to power any camera.
Recommended Lipo: 6s 2000 - 5100 Tattu R-Line
