@ryankonow needed something to get all that freshly built sr20 power and t51r mod goodness into the engine and out the tail pipe. Needless to say @mazdarift made it happen; the best parts available, couple late nights and some meticulous planning all came together to deliver this: purpose built for drifting, with extra clearance and tighter to chassis wherever possible, an oval front section, wear plates on common scraping areas, over bent and double reinforced hangers, double flex pipes… the list goes on. We can’t wait to hear this baby sing 😎
From applying protective film to your parts to prevent scratching, & a rigorous planning stage to ensure the exact volume and sound the customer is looking for- We got you covered. This customer came to us with an aftermarket system that was droney, too loud, and a bit raspy. We added in a larger resonator and larger mufflers. The end result? Deeper tone, drone eliminated, cruising volume decreased substantially. But still with that sporty crisp sound when you tip the throttle. Have a very specific sound you’re looking for? Let us know!
Summer is in full swing, back at it and hammering out jobs. Here’s a proper post of @philly_ap2 custom amuse style exhaust we recreated. @vibrant_performance bends, pie cuts resonator and muffler, supplied by the great @preparationdave at @speedfactorracing in house Helmholtz chamber, hand tig welded from the highest quality 304 ss materials. Was a pleasure collaborating on such a great project with even better people! I need a ride now that @powertunecanada has turned the boost up 😎
Seized, hard to reach hardware is what we do 💪🏽 this customer normally tackles their own repairs, however due to the location and condition of the fasteners they opted to have us swap out their parts for them. We had it in and out and back on the road in under 2 hours from drop off time!Wether it’s manifold studs, nut/bolt extractions, or custom bent pipes were here to service your exhaust system no matter what the job entails 👊🏽 call 2048814609 to book your appointment, or check out our common custom exhaust jobs through our online booking page 🔗 link in our bio
This customer needed a pair of mufflers and tips installed ASAP for his safety appointment but didn’t see a time that suited his schedule on our booking page. No problem! We offer evening appointments for many of our exhaust and muffler services, simply give us a call at 2048814609 and we will fit you in 👊🏽
A little preview into some of the fabrication techniques used on custom sheet metal and coach work. This projects coming along nicely and we’re stoked to see it once it’s done!
🚨Attention all S14 owners, don’t let tariffs, duties, conversion rates and shipping costs get you down!
The Red Dot Fab S14 Front Bash Bar is finally here. We spent weeks perfecting this jig to ensure a true bolt-on experience that tucks perfectly under OEM and most aftermarket bumpers.
The Specs:
✅ Handbuilt in Manitoba using premium DOM steel
✅ High-clearance design for large intercoolers
✅ Precision notched & MIG welded for maximum strength
✅ Reuses factory mounting points with clearance for grill mount
✅ Reinforced jacking point is standard
PRE-ORDER SPECIAL: 15% OFF!🙅🏽♂️
We’re running a limited first batch of 10 units.
🔥 MSRP $579 (+tax)
🔥 Early Bird Special $492.15 (+tax)
How to secure yours:
DM us to place your 50% deposit. Once these 10 spots are gone, the price goes back to MSRP.
Don’t wait for drift season to realize your front end is unprotected. Let’s get to work. 🛠️
#S14 #240sx #Silvia #SChassis #weldporn
The trifecta of high performance, low cost, seat time drifting 🤤 cut knuckles ✅ extended LCA’s ✅ welded diff ✅ @keonlysak ready to lay the mac down 💪🏽💯 #drifting #welding #weldporn #anglekit
Perforated vinyl done properly.
Window graphics for Red Dot Fab, printed and installed in-house by Stckyworks.
Exterior impact without sacrificing interior visibility — it all comes down to lighting and material choice.
This is why perf works.
#Stckyworks #VinylGraphics #PerforatedWindow #BusinessBranding
We’ve been keeping this on the DL for a while, but here it is! We’re proud to announce we are now offering undercoating and cavity wax services! Our in house lanolin/oil based fluid creates a self-healing barrier that locks out salt and moisture, stopping rust befor it starts extending the life of your vehicle. Right now, until the first snow fall we are offering this service for 20% off regular price. For cars our starting price is $265- on sale now for $220 + tax. SUV’s and Trucks, starting at $325 on sale now for $270 + tax. Rubberized undercoating is also available, call 2048814609 for more details or to book your service today! We would also like to note that this is an excellent product to protect your ice racer, and as a special thank you to @wsccracing , volunteers and club members will receive an extended grace period on the discount for this service.
Good battles. Great laughs. Even better memories. Our round against @reddotfabrication was one for the books — nothing beats going door-to-door with friends who push you to do better. Josh took the win this time… but we’ll be ready next season. 😉
#WSCC #DriftDay #SubaruDrift #DriftLife #DriftEvent #SubaruPerformance #TrackDay #DriftBuild #ManitobaMotorsports #LambdaMotorsport #DriftCanada #DriftCrew #Slideways #GrassrootsDrifting #DriftBattle #TrackDayVibes #CarFriends #RedDotFabrication #LambdaMotorsport #WSCCDrift #SubaruBRZ #MazdaMiata
