Final Look of the @marvelrivals Iron Spider Faceshell. 🕷️🕸️
I managed to make another lens to replace the broken one.
The fact that I’ve done 2 of the most complicated Spider Lens to make is very satisfying. The Superior and now Iron-Spider. 🙂↕️
Hope you guys love the result as much as I do. 🫶🏻
-
Faceshell file by: @joeprops3d
Processed by me
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
#spiderman #peterparker #ironspider #theamazingspiderman #ultimatespiderman #spidermanintothespiderverse #spidermanacrossthespiderverse #spiderverse #marvel #marvelgames #marvelrivals #marvelcosplay #marvelcosplayer #cosplay #cosplayer #spidermanmask #atsv
Mostly saving the galaxy.
Occasionally dancing instead.
Nothing about this helmet was meant to look clean. Every layer was weathered to feel like it’s spent years crossing planets, surviving fights, and holding itself together one mission at a time
Star-Lord has become one of my favorite characters to experiment with different weathering techniques on because there’s so much room to push texture and damage naturally. With builds like this, there really is no “perfect” finish
The LED faceplate is fully removable, and the nanotech panels lock into place
File by @joeprops3d
#marvel #starlord #mcu #cosplay #3dprinting
3D Printable Highly Accurate Marvel’s Spider-Man 2 PS5 Advanced Suit 2.0 Faceshell stl is now available on wf3d shop!
——————
• Include optional mid-frame.
• Include optional backside.
• Include mesh hole lens version.
• Include vacuum foaming lens version .
• Lenses can be taken out to avoid paint damage by popping them out from inside at the magnet-section cutout.
• The occupation of magnet section inside the faceshell is minimized, improving comfort and reducing faceshell size for the wearer.
• The default scaling of the file fits 56cm head circumference.
• Include a detailed “Read Me” PDF file to help you make this faceshell.
• The file has been tested and completely printable and usable.
• The models have no non-manifold geometry errors and overlapping meshes, and completely printable.
• Joyydesign4, rexdesign9, starcine.collectible, and any of their alternative accounts are not welcome to buy this file, they should not have and use this file.
——————
The creator of this file is JoeProps3D, the file will only be available on wf3d.shop. Purchase confirms agreement not to resell, mass produce, leak, or edit the file for resale.
And the file has also been modified, so any exploiters can be recognised.
模型的作者是JoeProps3D，只会在 wf3d.shop 出售，严禁二次销售、批量生产、泄露、或修改再卖文件，购买即表示您同意以上条款。
——————
#spiderman #spidermancosplay #spidermanfaceshell #faceshell #joeprops3d
。
👉👉👉👉Please DM me if you are interested.👈👈👈👈
。
3D Printable Highly Accurate Marvel’s Spider-Man 2 PS5 Rage Symbiote Faceshell stl is completed!
——————
• Include mesh hole eye version.
• Include vacuum foaming version eye STL.
• Lenses can be taken out to avoid paint damage by popping them out from inside at the magnet-section cutout.
• Minimised the poly count of STLs to optimise slicers’ performance.
• The occupation of magnet section inside the faceshell is minimized, improving comfort and reducing faceshell size for the wearer.
• The default scaling of the file fits a 57cm head circumference.
• Include a detailed “Read Me” PDF file to help you make this faceshell.
• The models have no non-manifold geometry errors and overlapping meshes, and completely printable.
• Joyydesign4, rexdesign9, starcine.collectible, and any of their alternative accounts are not welcome to buy this file, they should not have and use this file.
——————
The creator of this file is JoeProps3D. Purchase confirms agreement not to resell, mass produce, leak, or edit the file for resale.
And the file has also been modified, so any exploiters can be recognised.
模型的作者是JoeProps3D，只会在 wf3d.shop 出售，严禁二次销售、批量生产、泄露、或修改再卖文件，购买即表示您同意以上条款。
——————
#spiderman #spidermancosplay #spidermanfaceshell #faceshell #joeprops3d
。
👉👉👉👉Please DM me if you are interested.👈👈👈👈
。
3D Printable Highly Accurate Marvel’s Spider-Man 2 PS5 Rage Symbiote Helmet stl is now available !
——————
• Include mesh hole eye version.
• Include vacuum foaming version eye STL.
• Minimised the poly count of STLs to optimise slicers’ performance.
• The default scaling of the file fits a 57cm head circumference.
• Include a detailed “Read Me” PDF file to help you use the file.
• The models have no non-manifold geometry errors and overlapping meshes, and completely printable.
• Joyydesign4, rexdesign9, starcine.collectible, and any of their alternative accounts are not welcome to buy this file, they should not have and use this file.
——————
The creator of this file is JoeProps3D. Purchase confirms agreement not to resell, mass produce, leak, or edit the file for resale.
And the file has also been modified, so any exploiters can be recognised.
模型的作者是JoeProps3D，只会在 wf3d.shop 出售，严禁二次销售、批量生产、泄露、或修改再卖文件，购买即表示您同意以上条款。
——————
#spiderman #spidermancosplay #spidermanfaceshell #faceshell #joeprops3d #marvelspiderman #3dprint #marvelcosplay #marvelspiderman2 #marvelspidermanps4 #marvelspidermanps5 #faceshellspiderman #faceshellps5 #symbiotespiderman #symbiotefaceshell
。
👉👉👉👉Please DM me if you are interested.👈👈👈👈
。
3D Printable Highly Accurate Marvel Rivals Iron-Spider Faceshell & Helmet stl is completed!
Personally, this STL file is definitely one of the easiest for beginners to finish.
I recommend you to try it if you want to learn about the basics of sanding and painting.
——————
• Lenses can be used in both the faceshell and helmet.
• Include mid-frame version.
• Include separated eye frames and lenses.
• Include mesh hole eye version.
• Include vacuum foaming eye and lenses STL.
• Lenses can be taken out to avoid paint damage by popping them out from inside the faceshell or helmet at the magnet section cutout.
• The default scaling of the file fits a 57cm head circumference.
• Include a detailed “Read Me” PDF file to help you use the file.
• The models have no non-manifold geometry errors and overlapping meshes, and completely printable.
• Joyydesign4, rexdesign9, starcine.collectible, and any of their alternative accounts are not welcome to buy this file, they should not have and use this file.
——————
The creator of this file is JoeProps3D. Purchase confirms agreement not to resell, mass produce, leak, or edit the file for resale.
And the file has also been modified, so any exploiters can be recognised.
模型的作者是JoeProps3D，只会在 wf3d.shop 出售，严禁二次销售、批量生产、泄露、或修改再卖文件，购买即表示您同意以上条款。
——————
#marvelrivals #spiderman #marvelrivalsspiderman #spidermancosplay #spidermanfaceshell #faceshell
#ironspider #marvelrivalsironspider
#joeprops3d
3D Printable Spider-Lord V.2 Helmet STL is completed!
STL file purchase link:
https://www.wf3d.shop/products/3d-printable-star-lord-helmet-v2-stl-file-jp3d
Thank you @dat_boi_builds , @michel_van_opstal , and @wilko3dbuilds for providing important suggestions to help me improve this file.
👉DM me if you have already purchased the V.1 file.👈
(Hold the dots below the photo and scroll back and forth for better visual viewing.)
——————
Changes & Improvements:
• Added removable bottom part.
• Remade the eyes and separated them from faceplate, and now it’s easier to install LEDs and lenses.
• Improve faceplate separation and details.
• Improved magnetic systems on helmet’s backside
• Added separated version of helmet’s backside.
• Improved mouth part separation.
• Improved title pattern details on side tubes of helmet.
• Include a detailed “Read Me” PDF file to help you use the file.
Please, read, it.🙏
• Eliminated ALL non-manifold geometry errors and overlapping meshes.
• Joyydesign4, rexdesign9, starcine.collectible, and any of their alternative accounts, are not welcome to buy this file, they should not have and use this file.
——————
The creator of this file is JoeProps3D, the file will only be available on wf3d.shop. Purchase confirms agreement not to resell, mass produce, leak, or edit the file for resale.
And the file has also been modified, so any exploiters can be recognised.
模型的作者是JoeProps3D，只会在 wf3d.shop 出售，严禁二次销售、批量生产、泄露、或修改再卖文件，购买即表示您同意以上条款。
——————
#marvel #starlord #starlordcosplay #cosplay #starlordhelmet #3dprint #3dprinter #do3d #do3d_com #infinitywar #avengers #avengersendgame #avengersinfinitywar #thanos #blender3d #joeprops3d #guardiansofthegalaxy #guardianofthegalaxyvol3
。
👉👉👉👉Please DM me if you are interested.👈👈👈👈
。
3D Printable Spider-Man Brand New Day Faceshell STL is completed!
Thank you @gwen9p1 for providing me lots of good references to make this shell.
——————
• The default scaling of the file fits a 55cm head circumference.
• Include mid-frame version.
• Include 3D Printable eye mesh, and vacuum forming lense master.
• It’s optional to print the back-shell.
• Lenses can be taken out to avoid paint damage by popping them out from inside the faceshell at the magnet section cutout.
• Magnet section cutout can keep your cheekbones from pressing against it, offering extra comfort while allowing you to scale the faceshell smaller.
• Include a detailed “Read Me” PDF file to help you use the file. Please, read, it.🙏
• The models have no non-manifold geometry errors and overlapping meshes, and completely printable.
• Joyydesign4, rexdesign9, starcine.collectible, and any of their alternative accounts, are not welcome to buy this file, they should not have and use this file.
——————
The creator of this file is JoeProps3D. Purchase confirms agreement not to resell, mass produce, leak, or edit the file for resale.
And the file has also been modified, so any exploiters can be recognised.
模型的作者是JoeProps3D，只会在 wf3d.shop 出售，严禁二次销售、批量生产、泄露、或修改再卖文件，购买即表示您同意以上条款。
——————
#marvelstudio #marvel #marvelcosplay #marvelspiderman #brandnewdays #spiderman #spidermancosplay #brandnewday #spidermanbrandnewday #spiderman4
#faceshell #brandnewdayfaceshell #bndfaceshell #spiderman4faceshell #spidermanbrandnewday2026
#spidermanbrandnewdayfaceshell #spidermanfaceshell #spiderman3dprint #spidermanmask
。
👉👉👉Please DM me if you are interested.👈👈👈
👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆
。
3D Printable Spider-Man Brand New Day Webshooter stl is completed!
——————
• The model isn’t completely accurate to the actual prop, but the details are still highly resemble to overall design and shape, as many high resolution reference pictures that weren’t shown in the post were also used to make this model.
• Future updates are free once there are clear references.
• It’s optional to make the cartridges removable.
• The red wires are also included in the file, but making this part with actual real red wires is easier and recommended.
• Include a detailed “Read Me” PDF file to help you use the file. Please, read, it.
• The models have no non-manifold geometry errors and overlapping meshes, and completely printable.
• Joyydesign4, rexdesign9, starcine.collectible, and any of their alternative accounts are not welcome to buy this file, they should not have and use this file.
——————
The creator of this file is JoeProps3D. Purchase confirms agreement not to resell, mass produce, leak, or edit the file for resale.
And the file has also been modified, so any exploiters can be recognised.
模型的作者是JoeProps3D，只会在 wf3d.shop 出售，严禁二次销售、批量生产、泄露、或修改再卖文件，购买即表示您同意以上条款。
——————
#marvelstudio #marvel #marvelcosplay #marvelspiderman #brandnewdays #spiderman #spidermancosplay #spidermanwebshooter #webshooters #brandnewday #spidermanbrandnewday #spiderman4
。
👉👉👉👉Please DM me if you are interested.👈👈👈👈
。
3D Printable Highly Accurate Marvel Rivals Symbiote Spider-Man Faceshell & Helmet stl is completed!
(Hold the dots below the photo and scroll back and forth for better visual viewing.)
——————
• The default scaling of the file fits a 56cm head circumference.
• The same lenses can be used in both the faceshell and helmet.
• Lenses can be taken out to avoid paint damage by popping them out from inside the faceshell or helmet at the magnet section cutout. (See 2nd last photo)
• The lenses can be printed with FDM, but printing them with resin printers is highly recommended.
• Include a detailed “Read Me” PDF file to help you use the file.
• The models have no non-manifold geometry errors and overlapping meshes, and completely printable.
• Joyydesign4, rexdesign9, starcine.collectible, and any of their alternative accounts are not welcome to buy this file, they should not have and use this file.
——————
The creator of this file is JoeProps3D. Purchase confirms agreement not to resell, mass produce, leak, or edit the file for resale.
And the file has also been modified, so any exploiters can be recognised.
模型的作者是JoeProps3D，只会在 wf3d.shop 出售，严禁二次销售、批量生产、泄露、或修改再卖文件，购买即表示您同意以上条款。
——————
#marvelrivals #spiderman #marvelrivalsspiderman #spidermancosplay #spidermanfaceshell #faceshell
#joeprops3d
Doom slayer helmet is complete
Huge thank you to @joeprops3d for sending out the files absolutely honour❤️
More on this helmet soon
#doom #doomslayer #propsandSFX
