Don't drill holes in your bumper! 😱 Get SnapPlate 👊
SnapPlate removable front license plate mounts install and completely remove in seconds. The clean, minimal design blends perfectly with the Rivian front end when it’s installed and leaves no unsightly hardware behind when it’s removed.
SnapPlates are designed, printed, and assembled in California by Rivian owners and fans. We strive to reduce our environmental impact by using recycled plastics that are Made in the USA and by using Prusa 3D printers to make strong parts with internal structures that optimize our use of plastics.
Don't get caught without it.
🤩 Clean, Minimal Aesthetic
SnapPlate blends seamlessly with the front end of your vehicle and leaves nothing behind when removed.
- No screws, drills, or adhesive
- Installs & removes in seconds
- Includes optional anti-theft security screw
🌎Proudly Plastic & Stainless Steel
SnapPlates are 3D Printed with Made in USA Recycled PETG Plastic with Strategically-Placed Stainless Steel Fasteners.
- Better grille safety compared to metal
- Minimal waste compared to CNC routing
- Less plastic use compared to injection molding
- Designed, printed, and assembled in California, USA
➕
- Adjustable-height plate mount to reduce visibility on camera
- Adjustable rotating latches to fine tune the fit on the grille
- Breakaway features reduce risk of grille damage from minor accidents and car washes (remove for touch washes!)
- Repairable and upgradable with low-cost replacement parts
- Fits 2022-2023 Rivian R1T and R1S only (see our shop for other vehicles)
- Fits US, Canada, and Mexico license plates only (see Custom SnapPlates for other countries)
- Includes five black and four silver T25 torx security screws, T10/T25 screwdriver, and felt case
#rivian #rivianaccessory #r1t #r1s #electricvehicles #riviantruck #rivianr1t #rivianr1s #rivianaccesories #electriccar #cybertruck #electricvehicle #electrictruck #electriccars #offroad #tesla #teslamotors #electric #rivianofficial #carsofinstagram #rivianautomotive #snapplate #everyamp
We've just launched a revised version of our Rivian Dash Anchor, now available with Qi2 wireless charging. Available at EveryAmp.com
Compared to Version 1, Version 2 is easier to install and fits all model years and trims of the R1 family without needing adjustment. It clamps onto the metal vents behind the screen which makes for a much more rigid mounting point overall. For the raised arm version, we made it one piece to further increase the strength, while the low/standard height mount maintains the ability to install on either side of the screen (more on that in a separate post) with 17mm, 20mm, 22mm, and 25mm ball mounts.
#Rivian #RivianAccessories #EveryAmp #R1T #R1S #rivianr1t #rivianr1s #rivianautomotive
Don't drill holes in your bumper! 😱🫢 Get SnapPlate instead. 👊
SnapPlate removable front license plate mounts install and completely remove in seconds. The clean, minimal design blends perfectly with the Tesla front end when it’s installed and leaves no unsightly hardware behind when it’s removed.
SnapPlates are designed, printed, and assembled in California by Tesla owners. We strive to reduce our environmental impact by using recycled plastics that are Made in the USA and by using Prusa 3D printers to make strong parts with internal structures that optimize our use of plastics.
Don't get caught without it.
#teslamotors #tesla #tsla #teslamodel #teslamodely #teslamodel3 #teslamodels #teslamodelx #electriccar #cybertruck #electricvehicle #teslamodel #electrictruck #electriccars #offroad #teslamotors #electric #carsofinstagram #snapplate #everyamp
Front plate required? 📸 Don’t ruin that Model S aesthetic with drills or sticky tape.
Meet the SnapPlate+ — the cleanest, fastest way to stay legal without sacrificing your Tesla’s sleek front end. Whether you’re heading to a car show or hitting a touchless wash, this mount installs and removes in seconds. ⚡️
Why you’ll love it:
🚫 Zero Drills, Zero Adhesives: Keeps your bumper pristine.
🛠️ Installs in Seconds: No tools required for daily use.
🌍 Sustainably Made: 3D-printed in the USA from recycled plastic.
🔒 Security-First: Includes anti-theft torx screws to keep your plate where it belongs.
📏 Adjustable: Fine-tune the height for the perfect look.
From the 2012 classic nosecone to the brand-new 2026 Model S with bumper cameras—we’ve got you covered.
Stop stressing about the "no front plate" ticket and start snapping in. 🏎️💨
👉 Tap the link in our bio to grab yours!
#TeslaModelS #TeslaAccessories #EveryAmp #SnapPlate #TeslaLife ModelS EVAccessories TeslaGram NoDrill
At EveryAmp, we’ve always believed that your license plate mount should do more than just follow the law. It should break the laws of physics.
For years, EV owners have looked at wind as the enemy. We obsess over drag coefficients, we buy aerodynamic wheel covers, and we tuck our door handles away—all to squeeze a few more miles out of a charge.
But what if wind wasn’t the problem? What if wind was the solution?
Today, we are thrilled to announce a revolutionary leap in EV technology: The SnapPlate ADD (Air-Direct-Drive) Infinite Range System.
From Resistance to Power
The concept is simple: your car is already moving through a massive amount of air. Instead of letting that air push against you, the SnapPlate ADD uses our patented micro-turbine technology to harvest it.
Mounted in the high-pressure zone of your front bumper, the ADD turbine spins at up to 45,000 RPM, converting oncoming wind into raw DC current that feeds directly into your vehicle's high-voltage battery in real-time.
Features That Defy Thermodynamics: Infinite Highway Range: At speeds over 65 MPH, the SnapPlate ADD generates more energy than the motors consume. Your battery percentage doesn’t go down—it goes up.
Negative Drag Coefficient: The turbine creates a "Vacuum Vortex" in front of the car, effectively pulling you forward into a pocket of zero resistance.
The "Drafting" Mode: Tucked behind a semi-truck? The AI-powered blades adjust their pitch to "suck" energy from the turbulent air of the vehicle in front of you.
Plug-and-Play Installation: Just like our original SnapPlates, the ADD installs in seconds with no drilling and no permanent modifications.
"Physics is just a suggestion."
Our lead engineer (who may or may not be a Large Language Model) says: “By utilizing the Kinetic Energy Recovery System (KERS) at the point of impact, we have effectively bypassed the second law of thermodynamics. It’s not just green energy; it’s free energy.”
#aprilfools 🙃
Elevate your Tesla Model 3 Performance without sacrificing style or functionality. 🚗✨
Our SnapPlate Front License Plate Holder, is specifically designed for the 2026 Tesla Model 3 Performance with its bumper camera. This holder offers a sleek, minimal aesthetic that seamlessly blends with your car's front end, and it installs in seconds with NO drilling, adhesives, or screws.
Why choose SnapPlate+? It's optimized for strength, featuring stainless steel reinforced latches and base. You can also adjust the plate height (high, center, low) and customize your look while ensuring an unobstructed camera view. Plus, it's made in the USA from recycled PETG plastic, reducing environmental impact!
SnapPlate makes no contact with the painted bumper and doesn't rely on rubber pads that would grind dirt and rocks into your paint.
Say goodbye to bulky mounts and hello to the perfect front license plate solution. Tap the link in our bio to shop now!
#Tesla #Model3Performance #EveryAmp #SnapPlate #TeslaAccessories #FrontLicensePlate #Model3 #2026Model3 #EV #CleanAesthetic #Sustainability #MadeInUSA #model3highland #PerformanceModel3
NEWS: Rivian's 2026.03 software update enhances Kneel Mode on R1T and R1S vehicles, dropping them even lower with one-tap access, rolling activation under 20 mph, and support for uneven terrain up to 15% grades. The changes directly address feedback from YouTuber Zack Nelson about easier entry for his wife and others with mobility needs, like shorter drivers, kids, or elderly passengers. #Rivian #OTA #R1T #R1S #EveryAmp #SnapPlate
Keep your Tesla Model Y looking sharp 💨
The SnapPlate+ for the new Model Y is the ultimate no-drill front license plate solution.
Fast Install: Snaps on and off in seconds—perfect for car shows or touchless washes.
Camera Optimized: Custom split design ensures your bumper camera has a clear view.
Fits Your Style: Adjustable height for low, center, or high mounting.
Eco-Friendly: 3D-printed in the USA from recycled plastic.
Clean look. Zero damage. #Tesla #ModelY #ModelYJuniper #SnapPlate
Fast Install: Snaps on and off in seconds—perfect for car shows or touchless washes.
Camera Optimized: Custom split design ensures your bumper camera has a clear view.
Fits Your Style: Adjustable height for low, center, or high mounting.
Eco-Friendly: 3D-printed in the USA from recycled plastic.
#TeslaModelY ModelYPerformance TeslaJuniper ModelY TeslaAccessories TeslaLife EveryAmp SnapPlate TeslaMods EVPerformance TeslaGram TeslaCommunity ElectricVehicle TeslaOwner ModelYJuniper CleanBuild NoDrillPlateMount
Keep your Tesla Model Y looking sharp 💨
The SnapPlate+ for the new Model Y is the ultimate no-drill front license plate solution.
Fast Install: Snaps on and off in seconds—perfect for car shows or touchless washes.
Camera Optimized: Custom split design ensures your bumper camera has a clear view.
Fits Your Style: Adjustable height for low, center, or high mounting.
Eco-Friendly: 3D-printed in the USA from recycled plastic.
Clean look. Zero damage. #Tesla #ModelY #ModelYJuniper #SnapPlate
Fast Install: Snaps on and off in seconds—perfect for car shows or touchless washes.
Camera Optimized: Custom split design ensures your bumper camera has a clear view.
Fits Your Style: Adjustable height for low, center, or high mounting.
Eco-Friendly: 3D-printed in the USA from recycled plastic.
#TeslaModelY #ModelYPerformance #TeslaJuniper #ModelY #TeslaAccessories #TeslaLife #EveryAmp #SnapPlate #TeslaMods #EVPerformance #TeslaGram #TeslaCommunity #ElectricVehicle #TeslaOwner #ModelYJuniper #CleanBuild #NoDrillPlateMount
🚨 NEW PRODUCT DROP: The SnapPlate for Tesla Model 3 with Bumper Camera is HERE! 🚨
Stop settling for ugly, permanent, or adhesive-based front license plate mounts that damage your beautiful Tesla. The revolutionary SnapPlate is the clean, quick-release solution you've been waiting for!
✨ The SnapPlate Difference:
✅ ZERO Damage: Installs and removes in seconds with NO drilling, NO screws into your bumper, and NO sticky adhesive, and NO bumper paint contact!
✅ Quick-Release Design: Easily remove your plate for car shows, track days, or quick trips through the car wash—and snap it back on just as fast.
✅ Custom Fit: Designed specifically for the Model 3 to perfectly blend with the front end.
✅ Height Adjustable: Choose between High, Center, or Low positions for the perfect look.
Keep your Tesla Model 3 pristine and comply with the law when you need to. The perfect aesthetic and functional upgrade for every owner.
Tap the link in bio to get the ultimate front plate holder! ➡️ EveryAmp SnapPlate for Model 3
#tesla #model3 #TeslaModel3 #SnapPlate #EveryAmp #NoDrill #LicensePlateHolder #TeslaAccessories #EVaccessories #ElectricVehicle #model3highland #CleanAesthetic #CarMods #protectyourtesla
Save 15% now through Cyber Monday with code BF15.
All EveryAmp products are on sale. Ends 12/1. #rivian #rivianr1t #rivianr1s #snapplate #tesla #fordlightning #cadillaclyriq #blackfriday #madeinamerica #madeinusa🇺🇲
