🏍️🛠️One Stop Shop For Your Moto Tool Needs🧰
DCMX is your One stop shop for all your moto tool needs! Whether you are looking for a Factory level complete Moto Box, a MX Specialty Tool, or a replacement socket we got you covered! Check out our growing inventory of hard parts as well! Don’t see what you are looking for? Send us a DM and we will be happy to assist you in your needs!
#DCMXTools #DCMX #Tools #Toolbox #Motobox #Mechanic #Motocross #Moto #MX #SX #Supercross #Trail #Offroad #Racing #GNCC #AMA #Honda #Kawasaki #Yamaha #Suzuki #KTM #Husqvarna #GasGas #Triumph #Motolife #Moto #Dirtbike #Bike #motolife
WE KNOW!! Towels, shop rags, wrenches work… 🤨🫣
BUT, they are not the right tool for the job. And when Mom is looking for her dish rags, watch out!!😬
The Motion Pro Sprocket Jammer is one of those tools you don’t realize you NEED until you use it once. It locks your axle block in place while tightening your axle nut so your chain adjustment stays EXACTLY where you set it.
And speaking of chain adjustment… the “3 finger rule” isn’t accurate. Every manufacturer has a specific chain slack spec, and they’re all different.
That’s why we pair the Motion Pro Sprocket Jammer with the DCMX Chain Slack Gauges — so you can set your chain tension to FACTORY SPEC every single time. ✅
✔️ Prevent premature chain & sprocket wear
✔️ Help avoid transmission damage
✔️ Keep your rear wheel aligned properly
✔️ Improve safety and consistency
✔️ Make adjustments quicker and easier
Right tool. Right setup. Right results. 👊
Available now at dcmxtools.com
#motocross #dirtbike #supercross #garagebuilt #asmr
🚨 STILL TRUSTING “WATERPROOF” SWITCHES? THAT’S A RISK. 🚨
Mud, soap, pressure washers, and water intrusion can destroy your map and start switches when you least expect it. One wash can turn into an expensive headache… or a bike that won’t fire when it’s time to ride.
That’s why we created the DCMX Switch Wash Covers. 💦🔥
✅ Protects your switches from water, soap & debris
✅ Helps prevent moisture-related switch failures
✅ Perfect for washing, loading, transporting & storage
✅ Snug fit with a factory look
✅ Quick and easy installation
Wash your bike without worrying about soaking your electronics. Problem solved. 👊
🔥 BACK IN STOCK NOW! 🔥
Available for KTM, Husqvarna & GasGas models.
Click View Shop or visit DCMXTools.com before they’re gone again.
#ktm #husqvarna #gasgas #motocross #dirtbike
@dcmxtools Steering stem bearing greasers, mini grease gun and stem nut wrench
.
These tools are tagged in the post under PRODUCTS 🛠️🧰
.
These tools make bike prep a breeze! Go check them out today
🚨 “3 fingers” isn’t a chain spec. It’s a guess. 🚨
Did you know every manufacturer has a DIFFERENT chain slack specification? What works on one bike can be completely wrong on another. Yet most riders still use the “3 finger method” and hope for the best. 😬
A chain that’s TOO TIGHT can cause:
❌ Premature chain & sprocket wear
❌ Transmission and countershaft damage
❌ Excess stress on bearings and suspension components
❌ Broken chains that can destroy cases or lock up your bike
A chain that’s TOO LOOSE can cause:
❌ Chain derailment
❌ Damage to your swingarm and guide
❌ Safety risks on the track or trail
And let’s be real… a broken chain at speed can lead to a LOT more than an expensive repair bill. It could leave you laid up on the couch with an injury instead of riding. 🏥
The DCMX Chain Slack Gauge takes the guessing out of chain adjustment and helps you set your chain slack accurately and consistently every single time.
✔️ Fast & easy to use
✔️ Accurate measurements
✔️ Helps protect expensive drivetrain components
✔️ Improve safety and peace of mind
✔️ A must-have tool for every motocross and off-road rider
Stop guessing. Start measuring.
Available now at DCMXTools.com
#motocross #dirtbike #supercross #offroad #asmr
Ever wonder why your steering bearings feel like 💩?
One of the biggest reasons steering stem bearings fail early is because grease never actually gets pushed behind the rollers where it’s needed most. Most riders either don’t grease them enough… or avoid the job completely because it’s messy and time consuming.
The DCMX Top Steering Stem Bearing Greaser changes that.
✔️ Quick
✔️ Clean
✔️ Easy
✔️ Proper grease coverage behind the rollers
More protection. Longer bearing life. Less mess in the garage.
Available for Japanese and European dirt bikes now at DCMXTools.com 🔥
What maintenance job do YOU hate doing the most on your dirt bike? 👇
#motocross #dirtbike #supercross #mxlife #offroad
🚨 STILL POURING OIL ALL OVER YOUR ENGINE CASES? 🚨
Stop the mess. Stop wasting oil. Stop fighting cheap funnels.
The DCMX Threaded Funnels are one of those tools you don’t realize you NEED… until you use one once. 🛠️🔥
✔️ Threads directly into your cases for a secure fit
✔️ Faster oil changes with less mess
✔️ No more balancing funnels while trying to pour
✔️ Helps prevent spills on graphics, engine cases & shop floors
✔️ Vented design for smoother, faster oil flow
✔️ Built for riders who actually work on their own bikes
Whether you’re wrenching in the garage, at the motocross track, or between motos at the races… this is the RIGHT tool for the job. 👊
Available for most modern day dirt bikes. Specific fitment gives you that clean, factory-level oil change experience every rider should have.
If you ride motocross, supercross, off-road, trail, or race weekends… this belongs in your toolbox.
👇 QUESTION OF THE DAY 👇
What’s the MOST annoying part of changing oil on your dirt bike? Spill? Drain bolt? Dirty funnels? Let us know below!
Available now at DCMXTools.com or tap “View Shop” above. ⚡
#motocross #dirtbike #yamahayz #supercross #offroad
💦 Some of y’all pressure wash your bikes like you’re trying to remove the VIN number. 😭
Then act shocked when the start button quits, the map switch freaks out, or the bike won’t fire next ride. 💀
That’s exactly why this KX450 is running the full DCMX Wash Protection setup. 👊
✔️ ECU Wash Cover
✔️ Air Box Wash Cover
✔️ Start/Stop & Launch Control Covers
✔️ Exhaust Plug
Protect the expensive stuff BEFORE you turn your wash routine into a repair bill. Water, soap, and mud don’t belong inside your electronics. 🏁
Built for riders that actually maintain their bikes.
Available now at DCMXTools.com
👇 Be honest 👇
What is your process when washing your bike!?
#motocross
#dirtbike
#supercross
#mx
#dirtbikelife
JUST because your Suzuki doesn’t have a start button… doesn’t mean the other switches should go unprotected. 👀
Your RM-Z kill switch and traction control switch still take abuse from water, mud, soap, pressure washers, and roost every single ride. One bad wash and a moisture issue can leave you chasing electrical problems you never saw coming. 💦⚠️
The DCMX Suzuki RM-Z Switch Wash Covers are designed to help protect your controls while washing after a long day at the track.
✔️ Helps deflect water & debris when washing
✔️ Protects kill switch & traction control buttons
✔️ Clean factory fit and look
✔️ Easy install
Small protection. BIG peace of mind. 🤘
Available now at DCMXTools.com or tap View Shop above before they’re gone. 🔥
#SuzukiRMZ #ASMR #Supercross #Motocross #Dirtbike
To all the Moto Mom’s out there… Happy Mother’s Day! 💗
The ones loading bikes before sunrise.
The ones washing gear, packing coolers, turning wrenches, holding tear-offs, and cheering louder than anyone at the track.
The moms who sacrifice their time, energy, and sleep so their kids can chase dreams on two wheels.
You’re more than just moms… you’re mechanics, coaches, photographers, nurses, motivators, and the heart behind so many riders.
The moto world wouldn’t be the same without you.
Today we celebrate YOU. Thank you for every lap, every mile, every muddy boot, and every memory you help create. 🏁
Tag a Moto Mom that deserves some love today! 💐👇
#moto #motocross #dirtbike #motomom #motofamily
POV: Your toolbox finally looks as factory as your bike. 👀🔥
Custom graphics on the DCMX Kickstart MotoBox just hit different. Add your name, number, and colors to match your ride for that full factory look.
This isn’t some basic toolbox from the hardware store… this is built for moto riders who take pride in their setup. 💯
✔️ Custom graphics included
✔️ Moto-specific tools
✔️ Clean foam organization
✔️ Built for the garage, trailer, and track
The best part? Everybody at the track is gonna ask where you got it. 😎
Hit the link in bio or visit DCMXTools.com
#motocross #dirtbike #supercross #garagegoals #offroad
Admit it… your eyes aren’t what they used to be 👀😂
And even if they ARE… why struggle reading tiny ruler marks while trying to line up your forks perfectly?
Your fork height plays a HUGE role in how your bike turns, tracks through corners, and feels on the track. Even a millimeter can completely change the handling of your motorcycle.
That’s exactly why we created the DCMX Fork Height Pro Gauge Set.
✔️ Large easy-to-read markings
✔️ Quick and accurate setup every time
✔️ No more fighting rulers or crooked measurements
✔️ Stackable gauges for multiple height options
✔️ Faster adjustments at the track or in the garage
Stop guessing. Stop straining your eyes. Get your forks dialed in the easy way. 🔧
Available now at DCMXTools.com
#motocross #dirtbike #mxlife #supercross #asmr
