It's finally done! Full replacement fk8 seat covers, back cover and front vents in one piece. Easy installation, 10 mins tops, 2 screw, a few tabs to pull and you are good to go!
This is just one of the 60+ materials we can do, have something in mind? Dm us today! Time to kickass at car shows!
Any feedbacks are welcome, let us know in the comments below.
#fk8 #fk8typer #fk8club_ #fk8r #fk8tuners #fk8canada #civicfk8 #fk8club #civictyperfk8 #typerfk8 #fk8community #krieghoffk80 #hondafk8 #fk8society #fk8ctr #fk8rmalaysia #hondacivictyperfk8 #fk8civictyper #pieceofk8 #ctrfk8 #eastcoastfk8s #fk8malaysia #fk8owners #hondacivicfk8 #hondatyperfk8 #fk8turbo #fk8civic #hazelwolfk8 #fk8registry #jfk8
The massive reversed crane neck spoiler is done! From 3d designing, 3d printing prototyping and finally in carbon fiber, took us about 3 months to get it done! Wingspan is 1800mm, all parts were made in only carbon fiber, and stainless steel hardwares. Adjustable wing angle up to 10 degrees. 1800mm seemed too wide, but it ends just about the fender before arch extension.
What do you guys think?
Let us know down in the comments below!
#fk8community #fk8r #hondafk8 #fk8malaysia #fk8civic
5 exhausting months. Countless hours. Zero shortcuts.
The FULL carbon front bumper for the Honda Civic FK8 Type R is finally DONE šŗšø
One-piece construction.
No seams. No gaps.
Precision fitment from every angle.
This isnāt the cheap route ā this is the right route.
Premium carbon. Track-ready aggression. OEM+ fit.
If you drive an FK8, tag your homies below and letās hear what they think about this setup šš„
#CivicTypeR
#FK8TypeR
#HondaPerformance
#JDMUSA
#CarbonFiberParts!
Your feedback down the comments are much appreciated!
Tired of staring at the same interior every time you hop in your car? š
Time to level up with custom carbon fiber trims. Simply remove your OEM trims and send them over ā weāll handle the transformation.
Everything snaps back on like factory, with perfectly matched carbon weave direction for that true OEM+ finish. Topped off with super high solid clear coat for an insanely deep gloss shine āØ
This is the kind of upgrade that changes the whole driving experience. Whoās ready for a carbon makeover? š„
#CarbonFiber #CarInterior #OEMPlus #CustomCarbon #CarMods
Big boy spec, now for the Ferrari crowd. š²š¾
Full replacement carbon interior for the Ferrari F8 RHD ā built to snap back in like OEM, with zero compromise on fitment. Finished in classic twill carbon weave and layered in ultra high-solid gloss clear for that deep, showroom-level shine. Clean, precise, and exactly how Ferrari owners like it. Nothing beats this combo.
#FerrariF8 #FerrariMalaysia #F8Tributo #CarbonFiberInterior #SupercarMalaysia
Building something different for the FK8 š
Weāre dialing in a vented full carbon fender setup, inspired by GT race carsābecause function + aggression is the only way to do it. Lighter, more airflow, and a look that actually stands out at meets.
Would you run this on your Type R? š„š
#CivicTypeR #FK8 #HondaPerformance #CarbonFiber
Tired of blending in at every car meet? š
Stand out with our custom Crane Neck FK8 spoiler ā fully carbon fiber, including the brackets. Ultra lightweight, aggressive fitment, and finished in a clean satin matte that hits different under the lights.
This isnāt just an upgradeā¦ itās a statement.
You pulling up or getting overlooked? š¤
Drop your thoughts below ā¬ļø
#CivicTypeR #FK8 #HondaNation #JDMStyle #CarMeet
Stop settling for basic š„ Upgrade your build with one of the cleanest carbon fiber emblem combos out there.
Silver carbon base paired with a deep candy red inlay = perfection. Topped off with 4 layers of high-solid clear coat for that insane gloss and durability. This isnāt just an emblemā¦ itās a statement.
If youāre repping Honda, this is the detail your buildās been missing. Whoās rocking this on their setup? š
#HondaNation #CivicTypeR #JDMStyle #CarModsUSA #CarbonFiber
FK8 / FL5 ownersā¦ this oneās for you šŗšøš„
Another engine bay upgrade that actually hits different.
Full carbon plug / valve / coil cover ā call it what you want, it speaks for itself.
Outer layer: 3K twill carbon for that clean OEM+ look
Inner layer: signature red carbon inspired by Honda accessories
Finished in satin matte to give your bay that aggressive, refined finish
This is how you turn heads at every meet.
Whoās running this on their Type R? š
#CivicTypeR #FK8 #FL5 #HondaPerformance #JDMUSA
Stop putting "universal" carbon on a legendary hatch.
We just finished this FK8 Type R build using similar Honda carbon weave. Itās light, itās aggressive, and it matches the factory trim perfectly.
Not a fan of the standard look? We have over 60 different materials in stock to make your Type R truly one-of-one.
#FK8
#TypeR
#civictyper
#ctr
#FK8Club
FK8 ownersā¦ this changes how your turbo breathes.
80mm turbo inlet ā 30% larger than OEM for the Honda Civic Type R FK8.
Less restriction, smoother airflow, and better turbo efficiency.
Made from real carbon fiber, but finishes are limited due to tubing material availability.
Would you run this on your FK8?
And what part should we build next? šš„
#fk8 #fk8typer #civictyper #hondacivictyper #fk8nationā
Engine bay covers for all civic 11th gen. Spiced up the engine bay with this simple mod. Over 100+ of carbon fiber styles.
Exclusively for 11th gen civics!
#fl5civictyper #civic11thgeneration #civicfe #civicfl5 #civicfl5typer
