Chrome, 7075 Aluminum, Supreme Pair.
New @amrmachines frames.
I don’t usually mess with anything plated, but i tried one out a bit ago (thank you austin) and i was stoked! There’s no shaping or mech on the frame to preserve the chrome, but i did a healthy dose of scribbling all over the armature bar, yoke, binding posts and thumbscrews, as well as mechbossed zinc coil covers. Miniature sterling-silver contact/lock screws and shaped 1943 steel penny thumbscrews.
Liner is a great setup for small to medium groups.
Shader runs faster than my usual fare, close to a hybrid.
5.5/5.6oz‼️ they don’t get much lighter.
👇📲pics👉👉👉
impossible to get good pics in the shop lights…and the fingerprints and streaks…sheesh, that’s shiny shit. but they chrome.
.........................….
$……DM for $$$ info.
(SHADER SOLD)
Be the first to comment “sold,” as well as liner/shader/both and they could be yours. (available single or pair) Immediate paypal/venmo payment only. Directly to professional tattooers only.
Giger-Tarot Supreme Hardliner
Real-live, actual, H.R. Giger tarot-card coil covers bring the dark-magic. The card drawn for this project is “The Empress”………don’t know what any of the tarot means, but you can figure it out…….
‼️FRESH DECK OF CARDS‼️
Cut and shaped by hand out of steel flat-stock. Fully meched, including armature-bar. Darkest-black-oxide finish. Miniature sterling-silver coin contact/lock screws. Heart-shaped 1943 penny thumbscrew.
Swing/spring-vise will hold ANY tube.
7.0oz
really hard to get good pics of shiny black stuff with the shop lights…but it’s BLACK.
👇📲pics👉👉👉
(last couple pics have an old supreme animal marker just for comparison)
..............................
sold
AVAILABILITY UPDATE
here’s what’s here. not much left in the magic cupboard, get em while you can!
see previous posts, and/or DM for more info.
👇📲pics👉👉👉
i’ll give a few buck off for the ones made in 2025, they gotta go.
(ss damascus modified jones sold)
7075 Luxury and BRASS Shaders.
Classic frame style with the modern mech treatment. This pair i just did the sculpt on the frames with no extra scribblemech junk, then i meched the binding posts, armature-bars and yokes. Dark-black oxide finish on steel parts. Hand-carved brass contact/lock/thumbscrews. Mechbossed brass coil-covers for extra cool-points.
luxury swing/spring gate vise holds ANY tube.
The magical 7075 aluminum alloy gets the weigh-in down to 5.8 ounces!!!!
👇📲pics👉👉👉
.........................….
sold
Broken Bronze Bone
this starts out as one of the cast jackrabbit femurs from a couple holiday seasons ago. snapped in two and added the heavy sterling-silver bail, then added some mech stuff.
👇📲slides👉👉👉
sold
(i started a couple more so if you want on the list, lemme know)
Brass MICRO Supreme Pair.
This pair started out as a mistake, but ends up being a super rad little project. I messed up on the brazing-jig spacing when i knocked up the first frame and ended up with 7/8” geometry. I thought “no big deal,” because i’ve done a couple/few projects with 7/8” coils over the years and i’d just have to dig around through the parts bins for a pair of 7/8” cores. I dug around, and i found ONE 7/8” coil. In the 2000’s i did a bunch of them so i figured there’d be at least a couple so i kept digging. All 250 of the ltd edition bronze Zooliners were built with 7/8” coils, so there must be a reject pair i could rewind…Nope…couldn’t find any! Shit. Asked around my machine building pals and had two pair on the way to me before they even answered the quest. That meant i had to make a matching 7/8” shader to go with, and here we are! Thanks to Damon Burns and Tyler Cabrinha!❤️
Classic frame design with the modern-mech treatment. The ‘ole standby $1 eagle/pyramid coil covers bring the money magic. Miniature sterling-silver coin contact/lock screws. Shaped 1943 steel penny thumbscrews. Dark-black iron and patinated-brass, two-tone, finish.
Swing/spring vise will hold any tube.
6.0/6.2oz
..............................
👇📲pics👉👉👉
(last pics have some standard size gear for comparison)
sold
Untitled
Medium: hard carved, painted
Artist: @cainforge Aaron Cain based out of CA
Widely known as the Uncle LOL! of biomech
Aaron is one of the best influential custom machine builders in the world.
We are honoured to feature Aaron as part of yr 12!
This collective piece will be up on display and auction all weekend at @nixtattooshow
May 1-3
Chrome, 7075 Aluminum, Supreme Liner.
Slick new @amrmachines frame.
I don’t usually mess with anything plated, this one’s a special occasion. There’s no shaping or mech on the frame to preserve the chrome, so i did a healthy dose of scribbling on the armature bar, yoke, binding-posts, as well as mechbossed brass coil covers and hand-sculpted brass contact/lock/thumbscrews.
Great setup for small to medium groups.
5.5oz‼️ they don’t get much lighter.
👇📲pics👉👉👉
.........................….
sold
Blackmascus Jonesdog Pair.
Heavy acid etch brings out the figure in the different steels of the damascus, giving a nice, tactile feel in hand. Mechless with dark-black oxide finish. The ‘ole standby $1 dollar bill, eagle/pyramid coil covers satisfy the superstition. Mini sterling-silver coin contact screws. Shaped 1943 steel penny thumbscrews.
swing/spring vise will hold ANY tubes.
7.1/7.7oz
..............................
sold
Brass Rattle-Can, Model No.3 Pair
Jensen Model #3 style long-liner and long-shader. Hand cut/sculpted/meched out of brass flat-stock, then given the rattle-can paint and distress treatment. Brass embossed coil covers…now with FLYCARTA™️ lids. Mini sterling-silver coin contact/lock screws. Shaped 1943 steel penny thumbscrews.
Swing/spring vise will hold ANY tube.
6.9/8.2oz
👇📲pics👉👉👉
..............................
sold
