Quick clip of this 5Speed Swap we knocked out on this 2003 IS300.
🏎️: 2003 IS 300
🧙♂️: @jacobcorpus_
Project: Factory IS300 W5x Conversion. ECU, Wiring, Pedals, Transmission, Immobilizer, and Cluster.
If you’d like to get any work done or have any cool projects you’d like us to get hands on, send us a DM or a Text and we will get you on the waitlist! #b2bauto
#is300 #sxe10 #jzxe10 #altezza #5speedswap #manualconversion #3pedals #teq #トヨタ #toyota #drift #altezza_club #lexus
We very very rarely run Merch sales because we have just been too busy to organize a buy. One of our goals for 2025 was to have merch available for you guys atleast once. We have T-shirt’s, Pullovers, and Hoodies available. If you’ve hit us up about merch before I should have you on a list but just send us a message so we can update our list.
Tap in on DM to get on the list. We take all forms of payment: Cash, Card, Venmo, Zelle, Appletap. Pricing is on the second slide!
Last day to order will be 1/31/25
Shirts should be ready before Valentine’s Day.
If you require shipping we ship for $5!
b2bautoperformance.com
b2bautoperformance.com
BLACK FRIDAY SALE!
BLACK FRIDAY SALE starts Next Friday till New Years eve. EVERYTHING on the website is atleast 10% off, and this is the only time of the year we put our Bash Bars on sale.
We haven’t had a chance to update everyone in our latest shenanigans. So ill take this time to update everyone!
Most bars have overgone new revisions the last year. They have been modified based on all the recommendations and feedback from all you guys!
KOUKI TRUENO bars are now on V2.1! Jacking point has been Raised 1/4’, Mounting tabs have been added to mount from upper bumper supports. This was done to prevent sagging, and to allow you to bolt down Aftermarket Bodykits with JDM Bumper Mounts. and the Box end mounts have been elongated to allow more adjustment.
REAR BASH BAR is also on v3.0. This version now has a different Mounting Bracket to the chassis for easier installation, and way more adjustability for tweaked chassis. We have also Distinguished a bar for COUPES and HATCHES as they are not the same in the rear.
ZENKI TRUENO bars are also on V2.0. This new version allows for mounting of ZENKI OEM, RESTOREPARTS Aftermarket, and SHOWMECLASSIC Aftermarket. (They all are slightly different in width and thickness, which would make our v 1.0 not work with certain aftermarket bumpers)
JDM LIP BRACKETS have also been updates to a v2.0 These new versions are made of 6061 Aluminum, They are ANODIZED black, and LASER ETCHED with our logo. Much better bang for your buck. Super light and strong!
If you would like to have your bash bar the week of Christmas, the cut off is DECEMBER 5, 2024. All bars ordered after 12/5/24 will be turned in the week after NEW YEARs.
Thank You to everyone for the support, without you guys we aint squat. We appreciate and love every single one of you guys who has taken their hard earned money and bought a bash bar. Thank you for supporting our small business, and we will promise to keep doing our best for this chassis!
Really proud to show this off today. Carbon Fiber hoods on a Fiesta ST is not something you see every day….
You will now certainly see it on this car! I bought this hood awhile ago, but waited until I had the right amount of funds to get it on with some hood pins for safety reasons.
It all came together, and I couldn’t be happier with the result. It really takes this already special daily to a next level of uniqueness and style.
MASSIVE Thanks to Tony of bumpper2bumper Auto Performance for helping me put this deal together. Words cannot express how thankful I am to Alonso for such a clean and amazing install on these hood pins. Alonso did MUCH more than just an install of these pins, (which is already a wild thing… cutting into a brand-new carbon fiber panel to make it work) …………. Alonso quickly noticed the core support of the Fiesta inside the engine bay is all “plastic fantastic”. If he just installed the pins and left it alone, the plastic over time would probably crack and start to make things bad for that car.
Alonso went out of his way to make some custom metal brackets, to make these hood pins and that hood function safely and effectively for the life of that car. That is some amazing service that goes above and beyond anything I could have hoped for. They truly cared about the life of that car and took extra time out of their way to give this car some amazing love.
Very thankful and very stoked, this car has some SO FAR since I bought it in April. It’s one hell of a daily!
Parts installed:
Seibon 14+ Ford Fiesta RS Style Carbon Fiber Hood - HD14FDFI-RS
AeroCatch Xtreme Flush Plus Hood Pins 120-4000
Biggest sale of the year!
Starting 4th of July, all the way till 8/6/2024 we will be having bash bars on sale! If you’ve been on the fence about purchasing a bar, nows your chance!
Please visit our website (b2bautoperformance.com) and use code: 86DAY at check out.
If you would like to receive your bar by 86Day, the cutoff time is 7/21/24 Any orders after 7/21 will be fulfilled the week after 86Day.
Sale is good for:
Kouki Trueno
Zenki Trueno
Levin Bar
Rear Bar
New products will be uploaded to the site this week as well for Pre-Purchase!
#fab #fabshop #metalworks #b2bfab #ae86 #hachiroku #drift #toyotacorolla #corollabrotherhood #トヨタ #teq
A Quick easy way to get LSD on your IS300 is to find a donor FRS/BRZ/GT86 Diff along with the bolts and do the direct swap.
In this reel we’re gonna show you a few of the steps and some information required to get this done on your car.
Firstly you have to drop your stock diff, you do this by removing the driveshaft, and unbolt both rear CV axles. Once you remove those parts, the differential will drop by removing the 4 big bolts.
Once the differential is out, you use a slide hammer to slide out the stub axles and At this point you can start installing them onto your donor diff with either a rubber mallet, or a block of wood for protection.
Once your new diff is all buttoned up, you’re able to reverse the procedure and reinstall your new LSD. Before you reuse the stock bolts, make sure to order some OEM FRS/GT86/BRZ bolts because the bushing is definitely smaller on the newer diff, and the stock bolts won’t fit without machining the bushing.
#sxe10 #altezza #is300 #toyota #lexus #lsd #differential #トヨタ #frs #brz #gt86 #zn6 #driftcar #b2bauto #b2bmetal #b2bfab #socaldrift #avs
Spread the word! We know you, that you know someone that needs new brake pads. Don’t let em drive around squeaking all day! Hook your girl up! Hook your mom up! Hook your side-dude up! Point is don’t let your loved ones drive without brakes!
Sale is going on all summer long untill July 31st!
Next project in the shop:
1986 Toyota Corolla GT-S
Owner: @gahdamnlouis
For this one we will be
1) Fixing the Hatch Popper
2) converting the Gas Door to Magnetic
3) Front and Rear Chassis Stitch Weld
4) Boxing and Reinforcing the Rear Shock Mounts
5) Sealing the hatch spoiler holes in the lift gate.
6) Shaving the Engine Bay
7) Engine Bay Chassis Reinforcement Plates
Stay tuned for all future Reels and Product Developments. All these products will be available for purchase for your own vehicle off our website.
B2Bautoperformance.com
#ae86 #gts #gtstwincam16 #hachiroku #hachi #corollagts #trueno #levin #apex #gtv #b2bauto #fab #fabrication #metalworks
Installing the #boomba racing BOV Adaptor for the new Gen Integra! First time working on this new generation K20, they’re definitely sexy to look at, so now it’s gonna sound sexy to match 👍🏽
#b2bauto #boomba #boombaracing #bov #integra #aSpec #teggy #typeR #typeS #typeSH #acura #k20turbo #honda
2018 Mustang 5.0 Intake Manifold Upgrade.
@charliegatess__ came straight from the dealer with broken IMRC Valves inside his manifold. Stock 2017 manifold cost about the same as a 2018 upgraded model, so we went ahead and upgraded him to the new style. This bigger, wider, and ported manifold is supposed to be good for 30WHP with an OTS tune.
Hit us up for any Maintenance, Repairs, OEM+, or modifications to your vehicles. #b2bauto is a one stop shop for your whole family!
#mustang #fiveoh #5point0 #mustanggt #coyote #3rdgencoyote #stang #reels #fyp #explore #b2bauto @tlstokyo
Progress on @ryan_fascenda14 . This project has been a long time coming and is nearing its final stages. Keep your eyes peeled for more content on this s13 build.
#sr20 #s13 #nissan #silvia #ps13 #rps13 #sileighty #sil80 #driftcar #grassroots #hellyeah #b2b_auto
Product Spotlight:
SoCalQParts F8 LED Emblem
Snaps right into place of the stock emblem. Customer wanted to have the emblem come on with the DRL and the Low Beams. Colors and patterns can be switched through the Bluetooth app.
*NOT A SPONSOR* The idea of these reels is to get you guys more excited about modifying your cars!
#b2bauto #ledemblem #autoperformance #custom #led #rgblights #socalqparts
