I’ve been working on getting some more sticker and cloths and stuff on the websites as people keep asking me. Check out the website and let me know what you would like to see. Got a bunch of smaller stickers for now but if there is demand I’ll get bigger stuff printed.
Profiling some cams today. The set in the back were a set of new Cat Cams so I just needed to get the lobe centers so they can be installed with my 3d printed timing blocks. The closer set was a pair of 20 year old mystery cams. If you have a set of cams and don’t want to degree them in the motor or have a set that you are unsure what they are you can send them to me and I’ll profile them in my bench fixture and send them back with a data sheet and timing blocks to install.
Travis Sarno gave me the idea to machine the crank for a full length keyway. I got my local machinist make a setup to fixture them so they are perfect. I will make new keys out of chromoly key stock from McMaster Carr. Hopefully this gives some more resistance to shearing the key off and should make it easier to install the ATI damper. I got 3 m52b28tu cranks and an m54b25 done. I dropped off another B28tu and the S52 crank for my boat to do also.
Also running a sale for the rest of the month on I beam rods from Puretech Sweden. /product-page/puretech-sweden-135mm-connecting-rod-m20-m50-m52-m54-s50us-s52
