999 Automotive

This RS3 was in at 999 Automotive for a full driveline service 🔧 Work carried out included: • Engine oil & filter • Transfer case / bevel box service • DSG / gearbox service • Rear differential service • Haldex service & Haldex pump filter clean Keeping up with maintenance on these platforms is key, especially once they start making more power. 📍 Unit 3/47 Learoyd Rd, Acacia Ridge QLD 4110 📞 07 3272 9992 🌐 .au #999Automotive #RS3 #AudiRS3 #Haldex #EuroPerformance

Another DAZA sleeved block build underway at 999 Automotive 🔧 This one is part of our 1000+HP engine program, built to handle serious power with the right supporting setup behind it. If you’re planning a serious RS3 or TTRS build and want to take things to the next level, hit up the team and we’ll run through the options with you. 📍 Unit 3/47 Learoyd Rd, Acacia Ridge QLD 4110 📞 07 3272 9992 🌐 .au #999Automotive #DAZA #RS3 #TTRS #BuiltEngine

Had this G87 M2 in last week for an AWE SwitchPath exhaust install Simple upgrade, big difference in sound and driving experience. Get in touch if you’re looking to upgrade yours. 📍 Unit 3/47 Learoyd Rd, Acacia Ridge QLD 4110 📞 07 3272 9992 🌐 .au #999Automotive #BMWM2 #G87M2 #AWEExhaust #EuroPerformancE

Same-day ECU unlocks are now available at 999 Automotive 🔓 Working with @protocol_one_engineering , we’re offering in-house ECU unlock solutions for modern BMW platforms (2020+), with no cloning and fast turnaround. If you’re planning to tune or build your BMW, this is the first step — done properly, done once. ✔️ Same day service ✔️ In-house solutions ✔️ Proven & reliable Get in touch to book your unlock and start your build the right way. 📍 Unit 3/47 Learoyd Rd, Acacia Ridge QLD 4110 📞 07 3272 9992 🌐 .au #999Automotive #BMWTuning #ECUUnlock #EuroPerformance #CarTuning

We don’t just install parts — we supply them too. At 999 Automotive, we stock a wide range of performance parts for Audi, VW and European platforms, from simple bolt-ons through to full engine build components. Whether you’re chasing an intake, exhaust, intercooler, turbo setup or internal upgrades, we’ve got the parts to match your build. Check out our online store via the link in our bio. If you’re unsure what suits your setup, get in touch with the team and we’ll point you in the right direction. 🌐 .au 📧 [email protected] 📞 07 3272 9992 #999Automotive #EuroPerformance #PerformanceParts #AudiPerformance #VWPerformance

Mercedes in today for a rear rotor replacement. Keeping on top of wear items like brakes is just as important as performance upgrades. Fresh rotors help maintain braking performance, safety and overall driving feel. Just a reminder — we don’t just do builds. From minor servicing to brakes and rotors, we’ve got you covered. Get in touch with the team to book in. 🌐 .au 📧 [email protected] 📞 07 3272 9992 #999Automotive #MercedesBenz #BrakeService #EuroPerformance #WorkshopLife

Another DAZA engine build underway. Fresh block prepped and ready, paired with upgraded pistons and rods as part of our built engine program. Everything measured, assembled and checked in-house to handle increased power and long-term reliability. This is where the foundation is made. If you’re planning a build for your RS3, TTRS or RSQ3 and want to do it properly, get in touch with the team and we’ll walk you through the options. 🌐 .au 📧 [email protected] 📞 07 3272 9992 #999Automotive #DAZA #BuiltEngine #AudiRS3 #EuroPerformance

RS6 in today for a set of @modeautodesign 200cpsi catted downpipes paired with an @integrated_engineering carbon intake system. Upgrading the downpipes helps improve exhaust flow and reduce back pressure, allowing the turbos to spool more efficiently and deliver stronger performance.  Matched with the IE intake, airflow is increased significantly, supporting higher power and improving overall response.  A solid combination for anyone looking to get more out of the C8 platform while keeping things balanced and reliable. If you’re looking to upgrade your RS6 or RS7, get in touch with the team and we can help put together the right setup. 🌐 .au 📧 [email protected] 📞 07 3272 9992 #999Automotive #AudiRS6 #C8RS6 EuroPerformance

MK8 Golf R in today for an Invidia exhaust upgrade. Fitted with a full cat-back system to improve exhaust flow and give the car a deeper, more aggressive tone, while still keeping things refined for daily driving. The Invidia R400 systems are designed to balance performance and sound without excessive cabin noise.  A solid upgrade for anyone looking to wake up the MK8 platform without going over the top. If you’re looking to upgrade your Golf R, GTI or Audi S3, get in touch and we can help put together the right setup. 🌐 .au 📧 [email protected] 📞 07 3272 9992 #999Automotive #MK8GolfR #Invidia #EuroPerformance #WorkshopLife

Installed this on James MK8 GTI today — fitted with a JDY titanium air intake. A proper intake setup designed to improve airflow and reduce heat soak, helping the turbo breathe more efficiently while keeping things consistent under load.  Not just for looks — a solid upgrade for anyone looking to get more out of their MQB platform. If you’re looking to upgrade your GTI, Golf R or Audi S3, get in touch and we can help set up the right package. 🌐 .au 📧 [email protected] 📞 07 3272 9992 #999Automotive #MK8GTI #JDYPerformance #MQB #EuroPerformance

DQ500 gearbox in this week for a DEKA PRO-XTREME clutch upgrade. Once power levels start climbing, the factory DSG clutches can become a weak point. Upgrading to a PRO-XTREME setup helps the transmission hold significantly more torque while maintaining reliable shifting under load. A solid upgrade for anyone pushing the limits of the RS3, TTRS or RSQ3 platform, especially when paired with larger turbo setups and higher power builds. If you’re planning a serious setup and want to make sure the drivetrain can handle it, get in touch with the team and we can talk through the right options. 🌐 .au 📧 [email protected] 📞 07 3272 9992 #999Automotive #DQ500 #AudiRS3 #EuroPerformance

One of the biggest builds we’ve done for an RSQ3 belongs to Ebony and her Red Rocket. This build produced 695kW, backed by a serious combination of turbo, engine internals and supporting hardware to push the platform well beyond factory performance. Build includes: • T4 sized – JDY Precision Turbo & Engine Next Gen 6670 TTRS 8S / RS3 8V2 DNWA Turbo Kit • JDY Titanium Catback for Audi RSQ3 2.5TFSI F3 • JDY Intake Manifold SDI • JDY Billet CNC Aluminum Oil Pan • JDY Front Mount Intercooler (FMIC) for Audi 2.5TFSI RS3 – 1300HP 8V / 8Y • JDY 2.5TFSI RS3 & TTRS Engine Ultimate Block Internal Kit – Pistons JDY iBeam Conrod • Audi RS3 / TTRS / RSQ3 Ferrea Kelford valvetrain kit – 2.5TFSI DNWA / CEPA / CZGB • Kelford Cams Audi RS3 EA855 Stage 1 (Cam A) up to 1200HP • JDY Audi RS3 / TTRS 2.5TFSI Throttle Elbow BOV & Titanium Boost Pipe Kits • Audi / VW DQ500 DSG Breather / Catch Can RS3 8Y / 8V TTRS MK3 • JDY Titanium Air Intake for Audi TTRS 8S / RS3 8V / 8Y Purple • Custom Drag Spec Bilstein B16 MQB – Dave Henderson • Stavros Tsitlakidis Billet Coolant Flange • Stavbuilt Oil Filler Neck • Stavbuilt Oil Filter Housing • Dodson Motorsport DQ500 8/9 Race Clutch with Lid A serious package built to make the RSQ3 platform properly fast. If you’re planning a serious build for your RS3, TTRS or RSQ3, get in touch with the team and we’ll walk you through the options. 🌐 .au 📧 [email protected] 📞 07 3272 9992 #999Automotive #RSQ3 #AudiRSQ3 #BuiltEngine #PrecisionTurbo